UNSOLVED

Grey_Newt

updated

22 years ago

Closed

G

Grey_Newt

29 Posts

0

2978

February 12th, 2005 11:00

Inspiron 510m will not display through projector

Hi,
I cannot get my Inspiron 510m to display through a projector.
I've tried three projectors that all work with another Dell, and I know all about the Fn+F8 and graphics menu options to clone display etc. - but nothing works.
I've even loaded WinXP and Win2K from clean - no difference
  • spiked_martini

    1 Rookie

    •

    948 Posts

    176

    0

    Posted February 14th, 2005 16:00

    Can you be a little more specific? Is the projector detected by the computer as a possible display device? Have you tried updating your drivers, or tried third-party drivers?
  • Grey_Newt

    29 Posts

    176

    0

    Posted February 14th, 2005 21:00

    Hi Spiked_Martini,

    Thanks for coming back.

    No the computer is not detected by the projectors - they report 'no signal' and the projector display doesn't even flicker when the switch is made on the PC.  With my other Dell - the projectors fire immediately thay are plugged in - but with this one - nothing at all.

    I've used all the latest drivers and BIOS update from the Dell site - and even tried a later Intel video driver available on their site - no difference.

    I haven't tried any third-party drivers - wouldn't know which ones to use - and I shouldn't really need them should I ?????  It looks like a hardware problem.

    Thoughts ...................

    Thanks

    Martin

  • MBrown1003

    30 Posts

    176

    0

    Posted February 14th, 2005 23:00

    Same problem here....one additional wrinkle.  It all worked fine (display on the projector) first time I tried if.  After that, I attached a CRT to the monitor jack so I could have an additional display.  Since doing that, there seems to be no way to convince the machine to go back to a single desktop and present that signal on the jack.
  • Grey_Newt

    29 Posts

    176

    0

    Posted February 15th, 2005 20:00

    Update.....

    After a response from Dell, I now have a full display to an external monitor - but still nothing to any of 3 separate modern projectors.

    So it looks like a driver, rather than a hardware problem - but it makes the Inspiron 510m a no-buy piece of equipment if you want to connect to a projector - I'm going to start warning people of this as there doesn't appear to be a solution - apart from buying another make of laptop.