
UNSOLVED
M
MeWithProblems
1 Rookie
•
11 Posts
0
765
May 31st, 2009 08:00
Do I need to replace drive with dell unit
I have an Inspiron 6400/105 with a ST9160821ASATA drive.
Running the Pre Boot System Assessment program I am getting a error code 0146 suggesting I need to replace the drive. Do I need to buy this from Dell or can I just get this over the internet?
I live in SE Asia and dealing with Dell America couldn't be more difficult.
How do I configure the new drive?
Responses (4)
Solutions (0)
MeWithProblems
1 Rookie
•
11 Posts
326
0
Posted June 2nd, 2009 01:00
Okay. I have located a Samsung SATA drive.
I am running VISTA.
I understand that
- I plug the drive in
- Power up and go to the Bios to ensure detection?
- Then put the windows disk in
Then what?
Do I need to initialise or format the drive - I have no interest in creating a multi partioned drive.
MeWithProblems
1 Rookie
•
11 Posts
326
0
Posted June 2nd, 2009 01:00
I have located a Samsung SATA drive that looks good. Now what?
I know the next steps in installation are;
- Plug new drive in
- Power up and go to Bois and set for auto detect
- Put windows disk in and then...?
Do I have to format the drive? How do I do this?
Can someone point me to some instructions please.
Insert the Windows disc and reboot. Press F12 at powerup and boot from it. Follow the prompts to partition, format and install Windows.
Once that's done, install IN THIS ORDER your drivers:
Dell notebook system software
Chipset driver
Then install all other drivers, go online and do all Windows critical updates.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
326
0
Posted May 31st, 2009 08:00
You can use any standard 2.5" 9.5 mm SATA notebook drive you wish. You'll need to contact Dell for a Windows CD if you didn't order one with the system, though. The drivers can all be downloaded from support.dell.com.