joji george

updated

12 years ago

1

68767

February 25th, 2015 19:00

dell vostro 3500 ssd up gradation

in my dell vostro 3500 (i3) normal hdd  replaced with a new Kingston v300 ssd , but ssd detecting first time only when rebooting ssd missing  .same time the normal hdd  works fine   how can i solve this issue  anyone can help me please 

  • spillemw

    4 Posts

    3648

    0

    Posted April 11th, 2015 20:00

    No.

    I researched it extensively on the internet and it seems the Vostro 3500 is simply not compatible with Kingston SSD.

    I bought a Samsung 850 EVO SSD drive instead and that worked.

  • dallascowboyswo

    4 Apprentice

    •

    2380 Posts

    3609

    1

    Posted February 25th, 2015 19:00

    Hit F2 at boot and enter setup. Change SATA hard drive setting to AHCI. F10 save changes and exit.

  • 3609

    0

    Posted February 25th, 2015 21:00

    sir i already checked  with that settings  but  getting  same error  bios updated from a10 to a12  is this model is compactable with ssd.120gb kingston v300 model .  can you help to solve  this problem    

  • 3609

    0

    Posted February 26th, 2015 09:00

    only first time  bios recognized kingston v300 ssd  after the bios settings saved and rebooted  not recognize ssd . i also tried windows os installed to ssd with other pc and put back the ssd to laptop first time window logo appears and  suddenly shows  blue screen error and automatically reboots  . from the second time not recognize ssd  how can i solve this problem?

  • dallascowboyswo

    4 Apprentice

    •

    2380 Posts

    3609

    0

    Posted February 26th, 2015 09:00

    When you look in the BIOS does it recognize the SSD drive. 

    Did you remove the hard drive adapter from the assembly that is attached to the connection on the old hard drive and put it on the new one.

    You can click on Support on the top of this page and enter your service tag and look under manuals to find the service manual to see what I am talking about.

  • dallascowboyswo

    4 Apprentice

    •

    2380 Posts

    3609

    1

    Posted February 26th, 2015 09:00

    What sys file is the Blue screen showing?

  • dallascowboyswo

    4 Apprentice

    •

    2380 Posts

    3638

    1

    Posted February 26th, 2015 10:00

    When the SSD is recognized in the BIOS, but Windows 7 installation does not detect the drive, follow these steps:

    Disconnect any other hard drives or SSDs. Boot the Windows 7 installation disk. Choose repair, then advanced, then command prompt. Type: "diskpart" without quotes and press Enter. You will see a prompt labeled "diskpart". Type the following commands and press enter after each one.

    Diskpart > Select Disk 0
    Diskpart > Clean
    Diskpart > Create Partition Primary Align=1024
    Diskpart > Format Quick FS=NTFS 
    Diskpart > List Partition
    Diskpart > Active
    Diskpart > Exit

    Then reboot the computer to the Windows 7 installation disk.

  • 3638

    0

    Posted February 26th, 2015 20:00

    also tried  Linux live os installed in ssd then the first boot of laptop work fine then rebooted  from the 2nd time ssd not detected  

  • spillemw

    4 Posts

    3638

    0

    Posted March 6th, 2015 04:00

    I have the same issue with a 240 GB SSD from Kingston.

    The drive first shows up in the BIOS, but when you reboot the BIOS does not recognize it anymore.  If you remove the drive physically, and then reinsert it, the same thing happens (it recognizes it once, then not anymore, no matter how often you reboot).  I wonder if it has anything to do with this particular brand of SSD drives.

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    3638

    0

    Posted March 6th, 2015 04:00

    What model system is it installed into?