
UNSOLVED
Closed
Blank Display on LCD
I recently had a problem that i thought was due to video drivers, however it turned out to be mechanical.
I opened my laptop and got no display on the LCD, this sometimes happens when the screen saver goes on and the hard drive has not gone into hibernation, and is fixed by moving the mouse. However this did not work. I rebooted, and the start screens came up as normal then the screen went blank.
I found that the computer worked fine but was only displaying to an exterior monitor or projector. So i figured that it was somehow stuck in CRT output mode. However toggling the CRT/LCD button did nothing.
While searching for drivers and fixes in a lecture hall using the projector i can across a help screen that said to apply pressure around the power button and the monitor bezel. While doing this i noticed that the plunger that tells the computer the notebook has been closed looked funny. In fact this button had broken and was locked in the closed position. I was able to dislodge the broken piece and the picture returned to the LCD.
Some fixes are so obvious once you figure them out.
I can now either suspend or shutdown when i close and disconnect form power, or have my battery drained. Does anyone know of a way to fix this little piece or how to access this area of the computer? I have a 600m but getting at this part is probably the same on most of Dell's laptops.
Responses (2)
Solutions (0)
TheStingys
4 Posts
377
0
Posted November 23rd, 2005 14:00
Wow, I had the same problem and you have no idea how happy I am that I found your post. My problem was caused by the same exact thing. The little peg that tells your computer the screen is closed was stuck in the down position, keeping the LCD off. Thank you so much for your post it probably saved me hours worth of time.Message Edited by TheStingys on 11-23-2005 10:33 AM

spiked_martini
1 Rookie
•
948 Posts
377
0
Posted November 7th, 2005 17:00
This might be what you're looking for:
http://support.dell.com/support/edocs/systems/ins600m/en/sm/latch.htm#1006368