
UNSOLVED
XPS Studio 435T/9000: F12 boot options at startup?
I installed a 2nd drive in my 435T/9000, in preparation for Windows 7. I'd like to use F12 to control which drive boots, but I'm confused!
I've made my original Vista drive the "drive 1". I've made my new drive the "drive 0". When I press F12, and select "drive 0" (formatted, no OS), it still boots from "drive 1". I expected an error message say "no OS found". I checked in BIOS, but I don't see any sort of "disable trying other drives if selected drive fails" option.
Presumably I could disable the drive I don't want to boot in BIOS, but I was hoping the F12 function would suffice.
Note: Once booted, Vista sees both drives just fine. Per the drive administrator, the newly formatted drive is indeed "drive 0", and my original Vista drive C: is "drive 1". Technically my new drive is SATA3 and my original drive is SATA5 (originally SATA3).
Responses (3)
Solutions (0)
Alternatively, place the the windows disk in the CD/DVD drive, open the computer and disconnect the hard drive with the OS on it, reboot and press F12, select boot from CD. It will now install the OS on the new drive which will be the only one it will see.
fishnbanjo
261 Posts
560
0
Posted November 17th, 2009 05:00
If you formatted the drive using Vista it has an MBR on it so placing it in the Disk 0 position it would still know that the OS is on Disk 1 and boot there. I'd boot into Vista and place your Windows 7 DVD in your drive and when it lets you begin installing it have it install on Disk 0 then you won't have to F12 anything as it will give you the choice of Windows 7 as the DEFAULT OS and Vista as the second option.

goldfish1
1 Rookie
•
100 Posts
560
0
Posted November 17th, 2009 05:00
There's a MBR on drive 0 now, but there was not originally. I had the same F12 behavior (booting drive 1 when I selected drive 0) before the drive was formatted. At that time the drive did not even have a partition (per Vista, anyway).