UNSOLVED

fieldTechuk

updated

19 years ago

0

27434

February 6th, 2008 10:00

XPS at wits end with memory problem

My XPS 720 will not allow the EPP to be swithced on in the bios when running 4 gig of ram. Remove 1 Gig and it will allow switching on, With 4 gig it wont post at all and diag light 3 and 4 are alight . This mem is Matched Nvidia EPP 800MHZ SLI Ready (PC2-6400 , 4-4-4 , 1T ,Dual Channel , SLI Ready EPP) manufactured by OCZ and approved by nvidia.

 

I have moved the mem around in various slots and all slots work and all mem works. I have upgraded bios to A05.

Running Win XP Pro 32 bit

  • LeahcimAz

    306 Posts

    529

    0

    Posted February 6th, 2008 14:00

    Hi,

     

    Diagnostic light 3 & 4 = Memory modules are detected, but a memory failure has occurred.

    Follow the steps listed here,

     

    http://support.dell.com/support/edocs/systems/xps720/en/OM_EN/trouble.htm#wp1068583

     

     

    Mike

    XPS720
    Windows Vista Ultimate
    McAfee Security Center
    Microsoft Office 2007
    Intel® Core™2 Quad Q6600 2.40 GHz 1066 MHz
    4Gb Crucial DDR2 PC2-6400DDR2-800 SLI-Ready
    Qty.(1) Seagate Barracuda 250Gb Hard Drive
    Qty.(2) Seagate Barracuda 500Gb Hard Drive
    nVidia GeForce 8800 GTX 786Mb Memory
    Creative Sound Blaster X-Fi Xtreme Sound Card
    LITE-ON 16X DVD-ROM
    LITE-ON 16X DVD-RW
    Broadcom 5754 Ethernet NIC NetXtreme
    Dell 24" LCD Monitor
    Logitec Cordless Desktop Wave Keyboard & Mouse
    HP Scanjet G4010 Photo Flatbed Scanner
    Canon i950s Photo Printer

  • LeahcimAz

    306 Posts

    529

    0

    Posted February 6th, 2008 15:00

    Excuse me "been there done that. read post"   With that attitude "bite me"

  • 529

    0

    Posted February 6th, 2008 15:00

    been there done that. read post. something else wrong, know what the diags lights mean. I am a dell field tech.  what i wont to know is there an other problem here, that i dont know about

  • gdwrnch3

    2 Intern

    •

    3278 Posts

    529

    0

    Posted February 6th, 2008 16:00

       LOL,,,,,I agree with you. With all his "Dell field tech" experience, why is he asking us....???


    @LeahcimAz wrote:

    Excuse me "been there done that. read post"   With that attitude "bite me"


  • 529

    0

    Posted February 6th, 2008 17:00

    Sorry chaps. Please accept my apologies. I am at my wits end. Have used corsair mem , that did not work , used different corsair memory , and niether did that. I have tried all the diag , pick my fellow tech brains , and still no joy.

     

    Am ready to deep six this machine. And no even thought we are field techs , sometimes we do miss the little things. and we dont know everything

  • gdwrnch3

    2 Intern

    •

    3278 Posts

    529

    0

    Posted February 6th, 2008 19:00

       Have you installed Ntune, and gone into the dynamic bios and disabled the "spread spectrum" settings?
  • 529

    0

    Posted February 6th, 2008 20:00

    I have it sat at auto at present. 1T was problematic. I will try the OCZ forums. I do have ntune installed , but not cpu-z. were would i get this.

     

    I just thought , well nvidia board , nvidia approved mem , nvidia graphics = no probs.seems i was wrong

  • Davet50

    6 Operator

    •

    14442 Posts

    529

    0

    Posted February 6th, 2008 20:00

    Have you posted or contacted OCZ on their forums? I would recommend it. Also have you installed CPU-z and looked at the memory timings tab as well as the SPD tab with the mem installed...might yield some more info..

    Also do you have the 1T/2T set to auto in the bios???

    I believe that another user had them make custom EPP profiles for the sticks...

  • Davet50

    6 Operator

    •

    14442 Posts

    242

    0

    Posted February 6th, 2008 21:00

    Get CPU-Z from CPUID.com

  • 529

    0

    Posted February 6th, 2008 21:00

    disabled the spread settings for mem. no joy. change clock to 1T. no joy. wonder if win xp x64 will give me better joy