UNSOLVED

emailtim

updated

22 years ago

E

emailtim

22 Posts

0

8958

March 19th, 2005 02:00

Will a 1.6GHz 400MHz FSB Banias M60 fully utilize a 2.1GHz 400MHz FSB Dothan CPU Upgrade ?

All,
 
I am trying to way the trades of an M60 upgade versus M70 replacement.  I have updated my M60 to BIOS A8 which supposedly supports new chips, but doesn't specify which ones.
 
Will the A8 BIOS on a 1.6GHz 400MHz FSB Banias M60 fully utilize a 2.1GHz 400MHz FSB Dothan CPU Upgrade ?  $600 for a new CPU is cheaper than $3,000 on a new M70.  My M60 is in good shape and I hate to toss it if it is not necessary.
 
Thanks,
Tim
  • RedsB3

    106 Posts

    583

    0

    Posted April 18th, 2005 23:00

    Yes, you can update this to the Dothan CPU and it will fully use it.  This processor was available in the M60 before phasing out to the M70, so it will definitely work.
  • emailtim

    22 Posts

    583

    0

    Posted April 19th, 2005 00:00

    RedsB3,

    Thanks much for the info.  I have read about the M70 and it sounds like they removed some features, so it might be better to hold onto the M60 for a while.  I really like it, but faster is aways better.

    Sincerely,

    Tim

  • 583

    0

    Posted April 23rd, 2005 05:00

    Hi Everyone! I am new to this Dell Message Board...
     
    I have had my M60 for 2 years now and really really like it, but i got one with the 1.4Ghz processor and want to upgrade to the 2.1Ghz chip.  From the above thread it apprears i just have to update my BIOS to A8.  How do i do this?  Also, who could do this and also insert the new chip?  A Dell certified technician?  How do i find one? 
     
    I have heard that my 3yr warranty may be voided if i do this... Should i just wait for 1 year then?  Any advice appreciated...
     
    David
  • emailtim

    22 Posts

    583

    0

    Posted April 23rd, 2005 17:00

    David,

    The Dell Precision M60 BIOS A08 upgrade can be found at the following link.  This can be downloaded and installed by the user.  Read the instructions.  Don't stop, reboot or powerdown during the flash, else your MoBo will be brain dead.  Make sure you have a charged battery in (as a precaution) as well as AC hooked up.

    http://support.dell.com/support/downloads/format.aspx?c=us&cs=04&l=en&s=bsd&SystemID=WRK_NBK_PNT_P4_M60&os=WNT5&osl=en&deviceid=3914&devlib=1&category=1&releaseid=R92952

    The Dell Precision M60 Service Manual can be found at: http://docs.us.dell.com/support/edocs/systems/wsM60/SM_En/index.htm

    Look at the Microprocessor Module link for specifics about accessing the CPU.  I urge you to read the other pages as well to gain a better familiarity with your M60.

    According to this URL/Report, Intel is cutting prices on Dothan chips by 33.6 percent on July 24th, 2005 due to their rollout of new chips.  This will drop the 2.1 to the price of 2.0, and a cascade effect for the rest of the processor speeds.  Currently, the 2.1 is selling for @ $600, but should be dropped to @ $400 in July/August timeframe.

    http://www.channelregister.co.uk/2005/03/15/intel_pentium_m_price_cuts/

    Dothan's can be purchased at various online merchants including www.newegg.com.

    I usually do my on upgrade work unless parts break under warantee.  I only had to have onsite service done once when my keyboard went out on Inspiron 7500.  Dell sent out a tech to the job-site the next day, field stripped it, replaced the MoBo and keyboard, put it back together and it is now living a ripe old age serving as a music server (M60 retired it =).  After it was out of warantee, the harddrive started to give up the ghost, so I did the replacement myself.  I was able to mirror the drive before it died completely, so I didn't have to do a complete re-install on the new drive.

    I have no information on CPU replacements voiding the warantee.

    HTH,

    Tim

  • 583

    0

    Posted April 23rd, 2005 18:00

    Hi Tim,
    Thanks for your help!  I updated my BIOS from that link you posted.  :smileyhappy: The manual is very helpful.  I think i will do the CPU upgrade later in july when those prices drop.  i saw a 2GHz for $700 or so... pricey but if comes down to $500 or $400, that would be great!
    Will post when i upgrade.
    David
  • emailtim

    22 Posts

    583

    0

    Posted April 23rd, 2005 20:00

    David,

    Glat to hear the flash went without problems.  I have toasted one desktop MoBo because the flash failed in midstream.  It still makes me nervous to flash MoBo's.

    Here are some current Dothan prices.  They seem to be out of the 2.0's now which have been in the $400 range.  The 2.1 should drop to the $400 range in July/August and the 2.0 should drop to @ the 1.8 prices and so on.

    http://www2.newegg.com/Product/ProductList.asp?Manufactory=&PropertyCodeValue=507%3A6987&PropertyCodeValue=0&PropertyCodeValue=0&PropertyCodeValue=0&PropertyCodeValue=0&PropertyCodeValue=0&PropertyCodeValue=0&PropertyCodeValue=0&description=&MinPrice=&MaxPrice=&SubCategory=343&Submit=Property

    I bought my M60 without the Bluetooth card.  Now I wish I could upgrade, but I have had difficultites getting the parts from Dell.  When I called Dell's tech support people, they couldn't locate the Bluetooth card and wiring harness for sale after the M60's purchase.  Maybe that upgrade won't happen =).
     
    Sincerely,
    Tim
  • 583

    0

    Posted April 26th, 2005 05:00

    Hi Tim,
     
    About that Bluetooth chip that you are looking for...
     
    1. You could go to Ebay and post on the "Want It Now" board that you are looking for one...
     
    2. You could do an Ebay search for "Dell M60" and then contact those Ebay members and ask them if they have one they could sell you...
     
    I have done that in the past and found a camera i was looking for!
     
    Regards, David
  • 583

    0

    Posted April 26th, 2005 05:00

    Tim, Others...
     
    I was reading the M60 manual and saw the steps involved in removing the microprocessor and replacing it with the upgrade... It doesnt appear too complex.  I would like to do this myself... Any advice or caveats on actually removing the precessor itself. 
     
    Is the processor seated super-tight?  Do i need one of those U-shaped chip removers that holds the chip and slowly lifts it out while you turn a dial on top...(I saw one of those a while back.)  Or, is the precessor softly seated so slowly pulling it out by hand is possible?
     
    Any advice would be really appreciated, Thanks, David
  • ofelas

    649 Posts

    583

    0

    Posted June 15th, 2005 11:00

    Yes, the 2.1GHz Dothan CPU at 400MHz FSB will work just fine in the M60.
  • 149

    0

    Posted June 29th, 2005 21:00

    ofelas thanks for the reassurance... i plan to buy one in a month or so.