UNSOLVED

Ifti_23780

updated

22 years ago

I

Ifti_23780

18 Posts

0

5661

October 5th, 2004 14:00

Sapphire 9800XT in Dimension 8200 - Problem

HI

I removed my old nVidia graphics card and replaced it with a Sapphire Ati Radeon 256MB 9800XT Graphics card. All seems well and it seems to be working fine.

However, every time I boot my system as soon as it gets to windows I get the following error pop up:

CLI.exe

The application failed to initialise properly (0xc0000135) Click OK to terminate the application.

After I click ok it pops up again, and I click ok again and everything seems to work normally from then on. However, if I try to load the Ati Catalyst Control Centre the message just pops up again.

PLEASE help!!! What does the above program do and how can I cure this? Ive tried reinstalling the drivers but that made no difference!

Many thanks in advance

 

My system specs:

Dimension 8200, 2.8GHz Pentium 4 Processor (upgrade), 1GB RAM, 120GB HDD, 40GB second HDD, Creative Sound Blaster Live! sound card, 2 optical drives, and the new above graphics card.

  • Ifti_23780

    18 Posts

    191

    0

    Posted October 5th, 2004 14:00

    Oh I forgot to mention, I have installed the Catalyst 4.9 drivers!

    Thanks

  • Thirdrockfromsu1

    1 Rookie

    •

    366 Posts

    191

    0

    Posted October 5th, 2004 16:00

    Did you do a clean un-install of the old driver's first using a driver cleaner ?  Use the below following instructions and see if this clears things up...Good luck

    --------------------------------------------------------------------------------

    How to properly update your video cards drivers
    Written by Hardocp forum member cornelious0_0

    *** For ATI users ***

    1: " Through "Add/Remove Programs" proceed to uninstall the ATI Control Panel, Display Driver, and finally the Uninstaller itself.....in this order.

    2: Boot up into safe mode and run Driver Cleaner. Select "ATI" from the drop down menu and click on "Clean". Do the cleaning twice to make sure that everything is cleared out.

    3: Restart your computer (normally this time) and wait for windows to go through it's stupid auto detection of your hardware before continuing. Install your new drivers and restart your computer.




    *** Q&A ***

    - Q1: Why all the extra work???
    - A1: This is mainly an issue with Windows XP and its integrated file protection. When a person installs their video card drivers, some files are naturally stored in system folders. Anytime Windows XP detects some/one of these files missing, it will automatically replace them. As you can see, by simply uninstalling the drivers in windows you are NEVER completely getting rid of the old drivers. By starting in Safe Mode you are bypassing XP's file protection and allowing full, un-interrupted access to those files. Driver cleaner is just more so there for convenience as it knows what files to look for, and saves you the trouble of doing the job manually.

    - Q2: Why would you do this if you're just switching to another version of your drivers???
    - A2: I have found through personal experience that some files left behind after an install (due to XP's file protection) are basically meant for THAT driver set, as stupid as that might sound. Here's an example: From time to time I will load up the good old Doom3 alpha to kill a few minutes. The shadows in the game are spectacular, but not ALL the time. Using anything newer then the 3.9 Catalyst drivers the shadows begin to flicker sporatically, really ruining the experience. I'm sure that you have all at one time or another run into or heard of a bug in a game due to video card drivers. Truth be told, simply uninstalling the "bad" drivers will NOT always clear things up. I tried this originally, and going from the 4.3's back to the 3.9's the "quick" way.....the flickering remained. Running the Driver Cleaner in safe mode made it good as new, go figure ".

    http://www.driverheaven.net/cleaner/ Try this driver cleaner

  • Ifti_23780

    18 Posts

    191

    0

    Posted October 5th, 2004 17:00

    Hi

    Yes I did use the driver cleaner etc

    Nevertheless Ive solved the problem - u need to have Microsoft .net 1.1 installed for the console to work!!

    Thanks anyway