
Solved!
Go to SolutionL
LightLives
6 Posts
0
17766
March 1st, 2011 14:00
Replacement Video Card for 530s ORY007 Mobo
Hi All - I just upgraded a 530S to Windows 7 32bit and all was perfect until I plugged a printer into the front USB slot. Then Blue Screen and no more video output or post beeps. The computer turns on and the fans just stay on high but nothing more. I am guessing their may be some video card issue and it will have to be replaced. I can't find the specs for the PCI-e slots. Would I buy any low profile PCI-e card or is there a different form factor or connection I need to concern myself with? This is not a gaming PC and need to spend less then $50 on the card so any suggestions are greatly appreciated.
Cheers!
K
Responses (12)
Solutions (0)
nolinchitnis
41 Posts
1059
1
Posted March 1st, 2011 17:00
You can try Asus EN8400GS 512 MB (half height ) PCI-e card. I fitted it in my Dell 531s. You only need to replace the IO plate on the card (full height) with the spare one provided in the box (half height).
As per nvidia the max power consumption is 71W (at some other sites it is listed as 40W). So considering that your desktop has only a 250W power supply, this card shouldnt pose a problem. Pls check out the power consumption of cards before deciding to buy one. Your power supply needs to support the CPU wattage, the GPU wattage and other devices like the drives etc. So better to keep a few watts in spare.
BTW this card is available dirt cheap and gives pretty good performance. May not play top of the line games like crysis but is capable for most other things.
shesagordie
12 Elder
•
46017 Posts
1058
0
Posted March 1st, 2011 15:00
LightLives
Try connecting the printer to a USB port on the back panel and see if it makes a difference.
For the inspiron 530s, you require a low profile PCIe x16, video card, that's compatible with the default 250w power supply.
Check out the low profile video card HERE
Bev.
shesagordie
12 Elder
•
46017 Posts
1059
0
Posted March 1st, 2011 16:00
LightLives
Either PCI, or PCIe x16 will work fine, personally I prefer PCIe x16 cards.
The forum is using Tilligent software.
Bev.
LightLives
6 Posts
1058
0
Posted March 1st, 2011 16:00
Hi Bev - Thanks for letting me know it is a PCIe x16. I will search to make sure the 250 will work with it as well. Perhaps a PCI (not express) might be a better option?
Right now the computer won't boot so will take it to my schools lab to see if a generic video card will make a difference.
Oh! One other thing. I love the Dell bulletin board interface. Do you know if they are using a commerical or open source version and what it is? It's one of the best I've seen.
Cheers!
Kent
nolinchitnis
41 Posts
1059
0
Posted March 1st, 2011 17:00
Deleted
nolinchitnis
41 Posts
1059
0
Posted March 1st, 2011 17:00
LightLives
6 Posts
1059
0
Posted March 2nd, 2011 10:00
Woo Hoo! I thought the motherboard was fried for sure and so did my instructor but I followed the instructions on the link you sent, reseating all of the components and it worked. I thought I had fried a RAM module but by moving them they both worked and tested fine. I now have an issue where the front USB ports don't seem to recognize devices. Do you know if there are separate drivers I can load for these ports and how they are identified in device manager? The rear ports are working fine and the same devices are recognized there. It was when I plugged a printer into the front USB port yesterday that the whole system went down. So any advice you have is appreciated.
Thank you so much for your quick and vital reply.
K
shesagordie
12 Elder
•
46017 Posts
188
0
Posted March 2nd, 2011 13:00
Kent.
You are welcome. :emotion-21:
Bev.
LightLives
6 Posts
188
0
Posted March 2nd, 2011 13:00
Nolinchitnis, Bev and all who assisted me - Thank you!
I can't believe how incredibly fast you were able to get me information. I am guessing no one that responded works for Dell (paid by them for support) yet this is the fastest, clearest direction I have ever received and I've been doing techy stuff for decades. It's amazing how much collaboration and support exists in technology and the internet. If everyone worked to help one another as I experienced here we would have a very different world. Imagine an Exxon that wasn't worried about its profits and only about making someone's day as brilliant as they could. Wow! That's a world I want to live in :emotion-2:
Thank you, thank you, thank you!
Kent

nolinchitnis
41 Posts
1059
1
Posted March 1st, 2011 17:00
You mentioned your PC wont boot. Is it showing a blue screen or no screen If no (black) screen then I think BIOS issue rather than card issue. Please check on desktop forum "531s wont boot".