UNSOLVED

JMUC85

updated

24 years ago

J

JMUC85

15 Posts

0

14328

December 23rd, 2002 12:00

rdram and ddr ram

all right i have a 8100 series with 128 mb rdram.  It is in two modules of 64 each.  I was going to buy two more 128's but i just saw how much the rdram costs.  I was wondering if instead i could take out the 128 rdram and put ddr ram in it.  I didn't know if that was possible to do on my computer or not.  I hope it is but im afraid that might not work.  anyhelp welcome

thanks

  • 445

    0

    Posted December 23rd, 2002 13:00

  • volcano11

    2 Intern

    •

    27973 Posts

    445

    0

    Posted December 23rd, 2002 13:00

    bxtr is correct.  Your motherboard only supports RDRAM and there is no way you can put DDRRAM in without changing the motherboard.  Note also that memory on this system must be added in matched pairs i.e. if you want to add 256 Mb, you have to install 2 - 128 Mb chips.

    Steve

  • bxter

    6 Posts

    445

    0

    Posted December 23rd, 2002 13:00

    I dont think you can do this.

    Your RAM Slots are working with RD Technology and (i think) the Chipset on your motherboard is related to this.

    But I'm not 100% sure about this.
    You should wait with crying until someone else replied to your thread.
    (But you should prepare )

    Message Edited by bxter on 12-23-2002 09:05 AM

    Message Edited by bxter on 12-23-2002 09:07 AM

  • HEATLoE

    43 Posts

    445

    0

    Posted December 23rd, 2002 14:00

    why do u have to do it in pairs?? i have a 256mb stick and 64mb stick in mine lol. the system reconizes 320mb total.

  • volcano11

    2 Intern

    •

    27973 Posts

    445

    0

    Posted December 23rd, 2002 15:00

    RDRAM only has to be installed in pairs on a Pentium 4 system.  If you have a Pentium 3 system, like XPS-B series computers, then it does not have to be added in pairs.

    Steve

  • Aneill

    96 Posts

    445

    0

    Posted December 23rd, 2002 15:00

    Heat: Do you have RDRAM?
  • gjetson99

    83 Posts

    445

    0

    Posted December 23rd, 2002 15:00

    RDRAM must  be installed in pairs. SDRAM and DDR does not.  It is impossible to install the wrong type of RAM on your board (except for the wrong speed), because RDRAM, SDRAM and DDR all have different shaped slots & notches.  So no, you cannot switch which types of RAM your Dell uses.  Some aftermarket boards do support the use of two different types, but they cannot be used at the same time.

    Message Edited by gjetson99 on 12-23-2002 11:56 AM

  • willjam

    11 Posts

    445

    0

    Posted December 23rd, 2002 17:00

    You can mix sizes, but both slots have to be occupied. P-4 motherboards using 1 stick of RDRAM have a continuity module in the empty slot.
  • beneteau

    463 Posts

    446

    0

    Posted December 23rd, 2002 19:00

    JMUC85:

    Just wondering, what kind of price were you "shying away from" on the 128RDram?

    Lee

  • JMUC85

    15 Posts

    177

    0

    Posted December 23rd, 2002 20:00

    it was going to be about $140.00 for 256 mb of rdram.