UNSOLVED

MGx2972

updated

22 years ago

M

MGx2972

6 Posts

0

6953

April 4th, 2005 16:00

Out of the Box Dimension 5000 Freezing

Hi,
 
My brand new shiny Dell Dimension 5000 got unpacked plugged in booted up and froze during the WinXP setup process.
 
Reboot solved it and continued to work ok.
 
But, its been freezing during windows at least once per day. Hardly used it at all so bemused what could be causing this. Dell ran a diagnostic on hardware and apparently all is fine.
 
So, what software is causing this? I havent installed anything new yet.
 
Any suggestions greatly appreciated. My shiny new machine is losing its sparkle!!!
 
Cheers,
New Dimension 5000 User
  • fairygift

    10 Posts

    184

    0

    Posted April 4th, 2005 16:00

    consider upgrading your computer memory. it enhances the performance of the computer hardware and it actually speeds up the system. but its really odd why the system is freezing when youre just installing the windows xp... check the system requirements.. is it 256mb in RAM, enough HD space,  graphics card and stuff? hey, you must have a warranty or something.. call tech support now and demand something?!!!! =P
     
     
    goodluck
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    184

    0

    Posted April 4th, 2005 17:00

    Since it's new, with the power off, open the case and make sure all the cables, power cords, PCI cards, etc are fully seated.  Something may have come loose in shipping.  Be very careful around the motherboard as there are static sensitive devices, only touch the edges of the cables and the same way with the PCI cards, only touch the edges.

    Finally, occasionally the software does not get loaded correctly on initial startup and unfortunately the only way to correct that is to do a "clean" install and start over. 

    Other than these two suggestions, it's still under warranty (and within the 21 day Dell return period).  It's up to you which path you take, trying the reinstall or just calling Dell for warranty repair/support or Calling Dell Customer Service for a return authorization.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • se7en5ive2

    584 Posts

    184

    0

    Posted April 4th, 2005 18:00

      Judging by the model number, it would appear that you reside on the east side of the pond and may have a different course of action concerning customer support in England.  I would definitely consider calling support after determining that nothing is loose on the interior of the case as fireberd suggested. If you have 512 Mb of ram or greater, I wouldn't worry about memory issues. The only other problem I can think of is the use of McAfee A/V and Security that comes installed with these pc's and you may consider trying Avast  at http://www.avast.com/ for their free Home Edition and remove the McAfee software. It was a resource hog from day 1 on my new XPS G-4. also of note, if you have the Nvidia card, the drivers shipped with it are problematic. The beta  Forceware 74.61's found at http://www.guru3d.com/ solved some nagging issues with my 6800 vidcard causing lockups and game lag.

                                                                                  7

  • rsxter

    92 Posts

    184

    0

    Posted April 4th, 2005 19:00

    I would return the system and get a free replacement from Dell. It isn't worth it to be troubleshooting your system so soon!
  • MGx2972

    6 Posts

    184

    0

    Posted April 5th, 2005 06:00

    Thanks - I'll check the hardware is all fitted securely and then try a reinstall of the software (presume using the Ctrl F11 option at bootup?) ... if neither of these work, they can have it back !

    Thanks for your replies ... will update to let you know how it goes.