
UNSOLVED
M
Miketime53
6 Posts
0
2846
May 7th, 2005 16:00
No sound-the same as everybody else
Hi gang,
Like evybody else that seems to be reinstalling windows xp because thier computer was all messed up, my re-install has left me with no sound. Someone left a message tip with a link to a downloard fro this driver with the 198 in it. I followed every instruction to the hilt, from downloading the file, then transferring it to my desktop, and then bringin up "SoundBlaster" to my screen.
I got very quick box about installation, then the Sound Blaster home page became my wallpaper as absolutely notheing happened after that. I even left the computer on overnight and I still had my "wallpaper" this morning
One thing nobody has mentioned with this problem is not having a speaker ICON in the lower right hand corner of the screen. No matter what I've tried I have never got a speaker icon. will i not see a speaker icon utnil I get the right combination to get my sound back, or is no icon and no sound a sign of a more serious problem I have your basic 2400 and it is just a few days over being one year old
Hlep ( I'm so frustrated I can't spell anymore
Miketime
Responses (5)
Solutions (0)
Miketime53
6 Posts
294
0
Posted May 7th, 2005 18:00
You mention the term chip set drivers. I am not sure I know what you mean by that term. After installing the xp re-install, I then did the resource CD driver, and have since re-installed the "sonic now" CD which I thought would give me back my speakers. I do have a couple of other cd's that do not mention any thing about sound, but do mention the word driver on them. Would those be the chip set drivers you refer to.
In regards to the instructions, I have the book, and have followed them step by step. Like others have said I get to the device manager and see the yellow question marks. That seems to stop the process. I even went and checked out a Windows XP book and followed the instructions and I'm still at square one.
At this point would you recommend that I re-install those disks I have not yet done, or would I be better off to just start all over again and do another complete re-install.
@Miketime53 wrote:
You mention the term chip set drivers. I am not sure I know what you mean by that term.
Then you are not following Dell's reinstallation guide. Just go to "Product Support" at the top left of this page and select "Reinstall Guide" from the drop-down list. Then enter the information requested and select "Chipset" from the menu. It's all there in simple steps. Print it all out before you begin. I think you should reformat again and start from the beginning following the instruction.Miketime53
6 Posts
294
0
Posted May 9th, 2005 13:00
Thanks to everyone for thier help. I am really not sure what I did, but I followed the instructions again and this time the soundmax(not blaster) screen came up, told me to restart my computer and I had sound again.

fireberd
11 Legend
•
33399 Posts
•
112848 Points
294
0
Posted May 7th, 2005 17:00
Two issues, first do not use the retail SoundBlaster drivers, if you have a Dell supplied SoundBlaster card - you must use the Dell supplied drivers. But, unless you purchased the optional SB upgrade all you have is the on-board (on the motherboard) audio (probably SoundMax Audio).
The Dell supplied backup CD's have all the needed dirvers, etc for a restore.
The proper order of installation on a clean install (reformat the hard drive) is (1) Install Windows XP (2) install the Dell chipset drivers (3) install any other Dell drivers and (4) any other Dell supplied applications. If you did't install 1, 2 and 3 in that order there will be problems.