UNSOLVED

Vinny Idol

updated

18 years ago

0

10924

May 26th, 2008 07:00

No Sound Dimension 8400 With Vista Ultimate

Hello,

 

I have a Dell Dimension 8400 with Windows Vista Ultimate 32bit (Service Pack 1 Installed). I recently reformatted my PC and after reinstalling Vista I have no sound. Please note I had Vista and sound before the reformat with no problems and I have reformatted in the past with no complications, so I don't know why its acting up now. Sorry I realize this is like the hundredth thread for this problem but I read through about 90% with no such luck. I've tried installing countless various drivers from Realtek to SoundBlaster and I've yet to come to a solution, most of the time the programs tell me no such component is located on my computer.

 

I've tried uninstalling the driver and restarting the computer but everytime I do that Windows Update automatically (without giving me a chance to browse or cancel) installs SoundBlaster Max Intergrated and says the device is working perfectly but for the millionth time no sound is produced when needed.

 

I have an ideal on what the correct driver is cause even though I can't remember the whole thing I do recall it saying something along the lines of "Creative Labs ""don't know this part"", definitely not SoundBlaster or whatever. Don't get me wrong though, I'm willing to go with anything that will work.

 

Please if you have any ideals have no hesitation on replying.

 

Thank you for reading this and to anyone that replys.

Message Edited by Vinny Idol on 05-26-2008 04:00 AM
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    329

    0

    Posted May 26th, 2008 09:00

    There are two issues.  First, Dell does not support Vista with machine as there are no Vista drivers listed on the Downloads section for that PC.  Second only two sound "cards" are listed for that model, the Integrated (on the motherboard) ADI 198x (Analog Devices) and the SoundBlaster Audigy 2ZS.  If you have the SoundBlaster, go to the SoundBlaster site and download the Vista drivers (if they will work since its a Dell OEM SoundBlaster)  www.soundblaster.com

     

    If you have the Integrated Audio, you will have to look around for Vista drivers.  The newer systems do not use the Analog Devices module, they use the Sigma Tel which is different and not compatible with the Analog Devices model.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • C3PO5

    2 Intern

    •

    2693 Posts

    329

    0

    Posted May 26th, 2008 12:00

    http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R145551&formatcnt=1&libid=0&fileid=194065

    Hi

    The driver on the link above will work for your Dimension 8400 with Vista 32 bit !

    I used it for my D 8400 with Vista 32 bit until i went to Vista 64 bit.

    Good Luck

     

  • 329

    0

    Posted May 27th, 2008 07:00


    @fireberd wrote:

    There are two issues.  First, Dell does not support Vista with machine as there are no Vista drivers listed on the Downloads section for that PC.  Second only two sound "cards" are listed for that model, the Integrated (on the motherboard) ADI 198x (Analog Devices) and the SoundBlaster Audigy 2ZS.  If you have the SoundBlaster, go to the SoundBlaster site and download the Vista drivers (if they will work since its a Dell OEM SoundBlaster)  www.soundblaster.com

     

    If you have the Integrated Audio, you will have to look around for Vista drivers.  The newer systems do not use the Analog Devices module, they use the Sigma Tel which is different and not compatible with the Analog Devices model.


    I had Vista before with sound, no problem so I know one of these drivers have to work. 

     

    I'm not sure which sound card I have, is it possible if I open my computer there will be some sort of brand name or if not I can describe what it looks like and that is a way of telling?  I do know that I've tried the Sound Blaster drivers and they were of no use even though they say they install and work perfectly and I've also tried the Realtek drivers for the ADI 198Xand same result though it did say it was not the right hardware for the drivers. 

     

    Thanks you very much for the reply.

     


    @C3PO5 wrote:

    http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R145551&formatcnt=1&libid=0&fileid=194065

    Hi

    The driver on the link above will work for your Dimension 8400 with Vista 32 bit !

    I used it for my D 8400 with Vista 32 bit until i went to Vista 64 bit.

    Good Luck

     


     

    I have tried that multiple times and I never have any luck.  Maybe theres a certain install process I'm not getting like uninstall current driver, disable device, restart computer, install new driver then reinable device, ecetera?  I feel stupid trying to do this cause I've never had any problems with the sound beforehand so I feel like it must be something small I'm forgetting to do while trying this.

     

    Also thanks for the reply. 

     

     

     

    I read in a few posts that for some users is was the fact that they had the wrong chipset drivers or other and they had to install Vista drivers for that first before installing sound card drivers, could that be the problem?  If so can someone please post the correct chipset drivers for a Dimension 8400 with Vista Ultimate, Service Pk 1, Thank You. 

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    329

    0

    Posted May 27th, 2008 09:00

    In reference to the type of sound you have; if you have OEM sound (installed by Dell when you bought the PC) you either have the Integrated Audio (on the motherboard) or a Dell OEM version SoundBlaster Audigy 2ZS. 

     

    To identify what you have, if you have the integrated audio the I/O connections for the audio will be on the motherboard I/O panel.  If you have the optional SoundBlaster Audigy 2ZS then it will be in an "expansion" slot at the bottom of the PC in the same area as the dial-up modem.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 329

    0

    Posted May 27th, 2008 22:00


    @fireberd wrote:

    In reference to the type of sound you have; if you have OEM sound (installed by Dell when you bought the PC) you either have the Integrated Audio (on the motherboard) or a Dell OEM version SoundBlaster Audigy 2ZS.

     

    To identify what you have, if you have the integrated audio the I/O connections for the audio will be on the motherboard I/O panel. If you have the optional SoundBlaster Audigy 2ZS then it will be in an "expansion" slot at the bottom of the PC in the same area as the dial-up modem.


    I do have the expansion slot right under the dial-up modem so it must be the optional SoundBlaster Audigy 2ZS. I downloaded the correct Vista 32bit drivers from their website and installed correctly but still no luck. Any ideals?
    Thanks for the reply.
     
    Also if it means anything I have a PCI Input Device, and another Multimedia Input Device under unknown devices in the device manager aside from the one I already have. I can't get any drivers to work for either of them. Do these have anything to do with it?   
    Message Edited by Vinny Idol on 05-27-2008 07:14 PM
  • C3PO5

    2 Intern

    •

    2693 Posts

    329

    0

    Posted May 28th, 2008 03:00

    Hi Vinny

    If you have 2 sound systems they may conflict with each other

    go in to the bios and turn off the on board soundmax and see if the driver will

    install for your SoundBlaster Audigy 2ZS.

    Good Luck

  • 329

    0

    Posted June 2nd, 2008 06:00


    @C3PO5 wrote:

    Hi Vinny

    If you have 2 sound systems they may conflict with each other

    go in to the bios and turn off the on board soundmax and see if the driver will

    install for your SoundBlaster Audigy 2ZS.

    Good Luck


    Tried it, still no luck. 

  • 329

    0

    Posted June 2nd, 2008 07:00

    Finally got it working.  I just got real frustrated and decided to just open my PC to see what kind of card I had.  Turned out to be a Creative Labs Sound Blaster Live 5.1.  Couldn't find a driver for Vista so I just downloaded the driver for XP and ran it in compatibillity mode for service pack 2.  Worked perfectly after, thanks to everyone that replied once again.  Hope this post helps anyone else in the same situtaion.