
UNSOLVED
S
SassKwatch
9 Posts
0
42784
January 5th, 2013 10:00
New XPS8500 Special Edition Won't Boot
I received a brand new XPS 8500 Special Edition pc yesterday evening. Went through the ininital setup this am, and everything appeared fine.
Spent a little time getting familiar with Win8, and then decided to go get breakfast. Came back approx an hr later to find the machine had shut itself down. Turned it back on and it wouldn't boot past the Dell logo screen...was stuck there. Let it sit there for approx 10" on the chance it was doing something in the background, but it never did. So, I shut if off and tried again....same result.
Called tech support and spoke with a very pleasant/helpful individual who walked me through several troubleshooting steps. And when those steps didn't resolve the issue he had me run a 'Diagnostics' test....which indicated everything was fine with the hardware.
At that point, he indicated a reinstallation of Win8 was necesssary and that it would take 2 days to get the media disk for the reinstall dispatched to me. Two days.......which I'd bet dollars t' donuts means 2 business days......which, given this is all occurring on a Saturday am, means it will likely be at least Tuesday evening before I have the necessary tool to (hopefully!) fix the problem. Which means it will have been (at least) 5 days from the receipt of product until I have the ability to actually use it. Can anyone say.....yippee.
The more I think about what has transpired the more aggravated I become, and start searching the 'Net to see if alternative solution options might exist. And after discovering this forum and searching through it a bit, I find the following 2 threads initiated by users that seem to be experiencing the exact same problem...
- http://en.community.dell.com/support-forums/desktop/f/3514/p/19476506/20231113.aspx
- http://en.community.dell.com/support-forums/desktop/f/3514/t/19479652.aspx
So, it's not just me.....it's a systemic XPS8500 problem! Dell's Quality Control Dept has taken a nosedive. Let me say once again.....yippee.
To sum up......
- As of now, I've got a brand new pc that acts as nothing more than a paper weight. That's bad.
- I've spent the best part of my Saturday am trying to get this paper weight functional. That's more than a little annoying.
- Because Dell no longer provides any sort of recovery media with the pc when it ships, the machine will remain a paper weight for some time. Have I said 'Yippee' lately.(?)
- The fact that a user has to wait 2 (most likely business) days to receive a tool that *might* resolve a problem.......well, that's just......priceless.
Responses (20)
Solutions (0)
Hmmm I wonder whether the reinstallation will even work if it's getting stuck at the Dell logo screen? I'd have thought it would get past that and then give an error about a corrupted installation or something like that.... having said that maybe it's different with Win8?
If it were me I'd open the case and check everything is plugged in firmly (memory, hard drive cable etc) and try it, if no change I'd try to boot using a Linux live CD - this runs linux straight from a CD and might help indicate if the hardware has failed or the windows operating system. My bet is the Linux live CD wouldn't run either.....as I suspect hardware to blame not software.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
836
0
Posted January 7th, 2013 10:00
SassKwatch,
Does the system boot into the Bios when pressing F2? If yes, go to Boot- Boot Mode. It should be set to UEFI, not Legacy. Check that first. If still no go, boot into the Bios- Advanced- Onboard Device Configuration. Now, SATA Mode has different options, AHCI and RAID. Try them both one at a time and see if the system will boot into Windows. Make sure you press F10 to Save your changes before exiting the Bios.
DELL-Chris M (old account)
#IWork4Dell
I recently had this problem also. The 8500 started first time, I did some initial setup, shut down and 10 minutes later it would not boot past the Dell Logo. The instructions below fixed it for me. (Look for the original reply from Dec 12 there are helpful screenshots.)
Posted by Dell_Zohaib_R
replied on 12 Dec 2012 9:37 PM
Hi eilonwy77,
cashmoneyz indeed got it correct. The trick is to change the settings first to “Legacy”, restart the computer and then change it back to “UEFI”. For details on how to do this, go through the following steps:
1. Power on/Restart the computer.
2. At the first text on the screen or when the Dell™ logo appears, tap until the message Entering Setup appears.
3. Boot Mode will be listed under Boot.
4. Select Legacy using the arrow keys to navigate and press enter.
5. Repeat steps 1 through 4 and change it back to UEFI.
If steps 1 through 5 aren’t working then do the following:
1. Power on/Restart the computer.
2. At the first text on the screen or when the Dell™ logo appears, tap until the message Entering Setup appears.
3. Go to “Advanced” tab.
4. Select and open “Onboard Device Configuration”.
5. Open “SATA Mode”.
6. Select “AHCI”
7. Hit “F10” key to save and exit.
8. Boot to Windows desktop.
9. Restart the computer.
10. Repeat Steps 1 through 5 and change it back to “RAID”.
Do reply with results.
Thanks & Regards
Zohaib R
#iworkfordell
SassKwatch
9 Posts
836
0
Posted January 7th, 2013 16:00
wfab....,
Appreciate the suggestion, but the process you describe is *exactly* the process tech support took me through on Sat am. And once that was completed, the system did progress beyond the Dell logo, but now goes to a blue background 'Recovery' screen.
I don't have the exact wording of what appears on that screen, but it's basically indicating the system can't find the operating system. It does also display....
File: \BCD
Error: 0xc0000098
I am inclined to think the tech support rep I spoke with is correct in suggesting I have no choice but to wait for the dispatched recovery media and do a full reinstall when that arrives.
And I hope everyone understands, I have no quibble whatsoever with any of the tech support folks with whom I've conversed. I believe I have been provided with very good support by that team.
However, I am VERY disenchanted with the big picture 'purchase experience' thus far. For 2 reasons.....
1) As indicated in my initial msg, this sure appears to be a systemic problem with XPS8500 devices given the number of 'me too' situations found on this site alone. Leaves me with some concern about the system's long term viability.
2) But mostly I'm utterly disgusted with having to wait for recovery media having to be shipped to me.....which, as stated previously, means I will have had a 'paper weight' sitting in my den for probably 5 days before I'm able to use it. I mean, good grief...,
- How much would it have cost Dell to include the recovery disc I'm about to be shipped with the original purchase box. They did include a disc of 'drivers and utilities, why not a full recovery option.(?)
- Or why not a (fairly common from many mfrs) 'recovery drive' built into the system.(?)
- Or at worst, a downloadable image.(?)
Dell made it's name by providing good *value* in their machines. But the lack of any user friendlier recovery options isn't a sign of a frugal value oriented company. IMO, it's one sign of a company that is now just plain *cheap*.
This is the 3rd Dell machine I've purchased (the first of which I purchased circa 1997 and still have and still runs!). I hope I will find reason to change my mind once the current issue is resolved, but as of today and my less than positive perception of the company's current direction, there is a very strong likelihood this will be the last Dell machine I purchase.
Just adding another "me too".
This is my second XPS Special Edition in less than a month; the first didn't even get to the Dell logo when booting.
This one seemed ok (had it since yesterday) but today after I installed Office I had to reboot, then got the blue 0xc0000098 "the boot configuration data file doesn't contain valid information for an operating system" screen. I tried using the disk that came with the computer, but no dice, then tried installing Ubuntu on top of Windows 8, but it couldn't see the HDD.
I changed the boot mode to legacy as outlined about and am trying to install Windows 7 on it now.
SassKwatch
9 Posts
836
0
Posted January 12th, 2013 08:00
FWIW, tech supp was able to help me reinstall Win8, and the machine has been running fine since.
One notable item....
The machine was originally configured with 'Secure Boot' mode enabled and the Boot Mode as 'UEFI'. It now has Secure Boot disabled and is in Legacy boot mode. When we attempted to switch those 2 back to original config after Win8 reinstall, the system was dysfunctional.
I am told that Intel & Micorosft are working to resolve whatever is causing that issue.
Sasskwatch -- thanks for sharing -- I feel your pain -- exactly! My 8500 is in the "wait for the disks to arrive" stage. Should be in on Monday. Any other tips or tricks you would recommend other than disabling Secure Boot and using Legacy boot mode? Would like to get it right the first time when I finally have disks in hand.
I share your "expensive paperweight concern", and will note that both my Computer-Science-major son and my father-in-law both had their own Windows 8 nightmare stories. The Computer Scientist eventually fixed the problem and likes his touch-screen Lenovo laptop running Windows 8. My father-in-law is happy on his clean install of Windows 7 (that I did for him using Windows 7 recovery DVD's he wisely made the day he received his laptop). I wonder if such a thing exists for Windows 8...
SassKwatch
9 Posts
472
0
Posted January 13th, 2013 14:00
The only add'l suggestion I can make is to call Tech Supp when your disc arrives and let them assist w/ the reinstall. I thought about just doing it myself (am an application support person myself), but glad I made the call as the reinstall wasn't just a matter of loading the disc and letting it run. As mentioned previously, I'm more than a little unhappy with the overall purchase experience, but the Tech Suppport team has been excellent to work with, and I figured I may as well take advantage of their experience.
From my understanding, not every one of these incidents requires the system to be left in Legacy mode with Secure Boot disabled once the reinstall is complete. But it doesn't seem like that decision can be made until the reinstall is complete at which point we tried switching back to UEFI w/ Secure Boot enabled, but as soon as we did, the thing wouldn't boot again.

SassKwatch
9 Posts
836
0
Posted January 5th, 2013 10:00
That's what it did initially. By the time we'd completed troubleshooting with tech supp this am, it did go past the logo, and went to a 'Recovery' screen that indicated...
File: \BCD
Error: oxc0000098