UNSOLVED

42YT1J

updated

21 years ago

4

42YT1J

16 Posts

0

5281

December 28th, 2005 21:00

Just upgraded 2400 motherboard to a 4600

Hi, with thanks to advise from people on this forums I have just successfully managed this upgrade all went well,  the only glitch was the srews that hold the heatsink housing to the board weren't long enough as the 4600 board must be thicker or something so I had to improvise.
 
Anyway, the whole reason was so I could upgrade and I am looking at a geforce 6800 graphics card, or something similar. Will the existing power supply run it properly or will I need another if so what?
 
Thank you!:smileyhappy:
  • mx125race

    51 Posts

    164

    0

    Posted December 29th, 2005 03:00

    probably bump up to a Antec SmartPower 400W. As you see, i have recommended this all over these forums for a reason. It's flat out a great psu and well-known brand name. Dual fans, dual rails, great quality.
  • 42YT1J

    16 Posts

    164

    0

    Posted December 29th, 2005 12:00

    Thanks, is this a straight swap ie connectors will fit straight onto dell mobo?