UNSOLVED

Bonker77

updated

22 years ago

B

Bonker77

19 Posts

0

5286

January 21st, 2005 13:00

gx270 loses video signal

service tag # c1mkw31
 
User is a radiology transcriptionist, she will be in the middle of transcribing lengthy rad reports and the screen goes black, light on monitor goes to amber, but the PC is still running.  Swapping monitors doesn't help, still no video feed.
 
Have to reset the PC, then it works again for a time, but always happens again.  I pulled this machine and have it on my bench, left it on without any activity, just sitting at a login screen, I get the same error.
  • Bonker77

    19 Posts

    323

    0

    Posted January 21st, 2005 16:00

    Will try that right now and post what happens.
  • Bonker77

    19 Posts

    323

    0

    Posted January 21st, 2005 16:00

    Now the machine doesn't have a video signal long enough to finish booting into the Windows login screen. 
     
    This is a brand new hard drive and fresh install of a known good image.
     
    The machine doesn't reboot or shut off, there is a "clicking" sound and I lose video while the waiting for Windows 2000 login screen to appear.
     
    ???
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    323

    0

    Posted January 21st, 2005 16:00

    Bonker77,

    For testing,
    * Right click anywhere on the desktop
    * Click Properties
    * Click the Screen Saver tab
    * Choose None
    * Click Apply
    * Click the settings or Power button to the right of the globe
    * You should be on the Power Schemes tab
    * Under the heading Power Schemes choose Home/Office Desk
    * Under Settings for Home/Office Desk
    - set the monitor to never
    - set the hard disks to never
    * Click Apply
    * Click the Advanced tab (if listed)
    remove any checks
    * Click Apply if you made any changes
    * Click the Hibernate tab
    remove any checks
    * Click Apply if you made any changes
    * Click OK
    * Click OK
    * Click Start- Turn Off Computer- Restart

    What happens?


    DELL-Chris M (old account)

    #IWork4Dell

  • Bonker77

    19 Posts

    323

    0

    Posted January 25th, 2005 12:00

    there was some brown funk on top of one of the barrel type capacitors,
  • mdrago

    24 Posts

    323

    0

    Posted January 25th, 2005 12:00

    If you are still having this problem my guess would be that it's the system board.  Check the capacitors around the processor and memory to see if they are leaking and bulging.   If so, I would replace the system board.
  • colpat

    30 Posts

    323

    0

    Posted February 1st, 2005 10:00

    I work on a site with several hundred optiplex desktops. We have replaced more than 20 GX270 motherboards for this exact problem.  10 over the last 9 weeks.
     
    We experience this loss of graphics at various points of POST and operating system boot. We have to replace the motherboard in each case. We are looking through the history of warranty parts requests to see if it was a batch problem.
     
    Col.
  • GSimp

    5 Posts

    323

    0

    Posted February 17th, 2005 16:00

    I have several GX270s that are loosing the video while being used. It's like they go into standby while someone is using them. I have to hard boot them to bring them back up. Was yours covered by warranty?
  • Bonker77

    19 Posts

    323

    0

    Posted February 17th, 2005 19:00

    yes, it was covered under warranty.
     
    check the barrel capacitors near the memory, if the top is bowed upward, get the mobo replaced.
     
     
  • colpat

    30 Posts

    323

    0

    Posted February 18th, 2005 08:00

    The "capacitors" is a good pointer to the problem. I'v checked our recent failed mothers and they all have this feature.  :smileyvery-happy:

    I've also replaced every one under warranty.

     

    Col.

  • 253

    0

    Posted March 13th, 2005 17:00

    I was having the exact same problem, it is the capacitors on the mother board. They were domed shaped. Dell even told me it was a software issue and I needed to reformat the drive, go figure, ha, ha, ha.