
UNSOLVED
GX240 power supply questions
First question:
Its my understanding that you can use any old standard ATX psu in a GX240. However, without cutting up the case (which I don't want to do), the psu can't have a switch. Otherwise, the switch interferes with the mounting of the psu.
I am looking for a 350W (or greater) psu that doesn't have a switch and the power connector is aligned with the cutout in the back of the case for the power cord.
I have read in another thread that IBM has a Hipro 340W but I can't find a brand new one on Ebay and i'm not too keen on getting a used one.
Second question:
If I have to go with an underpowered psu, i'de like to go with a Fortron.
One thing that doesn't make sense is why the FSP 300W psu is not available for GX240 on the atxpowersupplies site.
Compare the following:
http://www.atxpowersupplies.com/300-watt-power-supply-fsp-atx-300-gu.php
http://www.atxpowersupplies.com/250-watt-power-supply-FSP250-60ATV-1A.php
Compare the following:
http://www.atxpowersupplies.com/300-watt-power-supply-fsp-atx-300-gu.php
http://www.atxpowersupplies.com/250-watt-power-supply-FSP250-60ATV-1A.php
It looks like the only difference is the 4 pin video connector.
I'm surprised that the 250W lists the GX240 but the 300W does not. What's the difference? Does this mean that the GX240 does not use a standard ATX psu?
Responses (6)
Solutions (0)
@FFXJCE wrote:
I don't know the power output of it but...Quotith SpeedStep from http://forums.us.dell.com/supportforums/board/message?board.id=oplex_other&message.id=23182&view=by_date_ascending&page=2 regarding GX260s:"PC Power and cooling makes a power supply that fits into the dell without issue but its $150. This IMHO is too much when a
pair of tin snips or nibbler tool is $20 or less."
As for the 300W you mentioned, I don't see anything significant, but it could be something like vent placement, per rail power requirements, or perhaps the physical length of the power supply.
You left a lot out. Including the part about Cheap and FAKE PSU's being used.
Buying a non dell power supply Does not void your warranty. It doesnt mean that dell must warranty that part. The Magnuson-Moss Warranty Act makes Illegal any TIE IN SALES. AKA you are NOT REQUIRED to buy DELL PARTS for your Dell. That would be a tie in sale and Illegal.
http://www.ftc.gov/bcp/conline/pubs/buspubs/warranty.htmYou Ignore a cheap PSU at your own Risk. A $20 or $35 unit is not likely to be a REAL 350 or higher unit.
http://www.tomshardware.com/2005/07/11/stress_test/
Cheap Fake PSU = Burnt motherboard/cpu/hard drive/video = dead machine. There are even COUNTERFEIT power supplies with brand names but even the brand is FAKE.
$20 is not a price that I would trust for a power supply. Especially since the makers of GOOD power supplies sell them in the $60 to $150 range.
PC Power and cooling makes a power supply that fits into the dell without issue but its $150.
This IMHO is too much when a pair of tin snips or nibbler tool is $20 or less.There is Absolutely Nothing whatsoever WRONG with
PC Power and cooling's PSU's They are Fine.
They do not however have a lifetime warranty
like the BFG models do and they cost too much IMHO.Same or better PSU from BFG and a hackjob is $99 range.
I don't know what happened to my previous post, but its moot at this point.
See my post here:
@gx240user wrote:
I don't know what happened to my previous post, but its moot at this point.
See my post here:
The GX240 uses standard ATX 12v version 2 wiring.
The information referenced in the other post is not correct.- Any comments on this 350W psu?It's a Sparkle/Fortron which is a plusIt seems to have the power connector in the right location. No switch."Complied with ATX and ATX12V standard"

FFXJCE
21 Posts
227
0
Posted July 12th, 2006 17:00
"PC Power and cooling makes a power supply that fits into the dell without issue but its $150. This IMHO is too much when a
pair of tin snips or nibbler tool is $20 or less."
As for the 300W you mentioned, I don't see anything significant, but it could be something like vent placement, per rail power requirements, or perhaps the physical length of the power supply.