
UNSOLVED
disk numbering anomaly.
I have a one year old XPS 630i that originally had one 500 gb hard drive. Sometime ago I added a second similar hard drive. The original drive I formatted into three partitions: Win XP, Data and spare. The second hard drive I labeled Backup. I use Norton Ghost 12 to periodically back up the XP and Data partitions, including daily incremental backups. This has worked well.
Now for the anomaly: I noticed a while back that Disk Management reports the original drive (XP, data and spare) to be drive 1; the newer drive (backup) is drive 0. When I installed the newer drive I simple connected an existing data pigtail to the drive; I did not mess with the existing drive connections. This leads me to think that when the machine was built the existing drive was connected to the SATA port for drive 1 on the motherboard. The fact that this works I find strange since I thought that the boot partition must be on drive 0.
question: Is there any reason for me not to go in and reverse the connections so that the original drive becomes drive 0?
Responses (3)
Solutions (0)
shesagordie
12 Elder
•
46017 Posts
192
0
Posted May 12th, 2009 12:00
James
Happy to hear that everything went well and thank you for the heads up. :emotion-11:
Bev.

shesagordie
12 Elder
•
46017 Posts
192
0
Posted May 10th, 2009 16:00
Jas461
Yes, you should be able to switch the data cables, I have done that several times, when there's an 'imaged' hard drive as the secondary, on different PC's without a problem
Note: With SATA, the 'Boot' drive 0, is always connected to the motherboard's SATA0 connector.
See HERE
Bev.