
UNSOLVED
Dell Inspiron 530- New GPU causes black screen on boot-up
I just bought a Geforce GTX 650 graphics card and upon installing it I've had a host of problems. First, my computer was automatically restarting twice before booting up normally. This stopped after I fastened the gpu at a straight angle because before the screw in the back would fasten it at a slight angle. Now when I connect the monitor to the motherboard, the computer doesn't seem to recognize the new hardware is there even though I can hear the gpu's fan going during the boot-up. If I plug the monitor straight into the gpu I get a black screen. I'm sure the gpu is connected to both the pci express x16 bus and the 6 pin pci-e.
Here's my specs:
Dell Inspiron 530
Intel(R) Core 2 Duo CPU E6550 @ 2.33 GHz
3GB RAM
32 bit OS
Windows Vista
Intel(R) G33/G31 Express Chipset Family
Power supply has a max load of 530W
If I missed any important information I'm more than willing to provide it.
Responses (6)
Solutions (0)
I got the GPU to work, turns out I hadn't pushed the GPU far enough into the PCI express slot despite having heard a click (silly I know).
The problem I'm having now is that when I update my gpu drivers, the computer gets caught in an endless loop of resets that can only be escaped by going into safe mode and uninstalling the drivers. Of note, the screen goes black for a while, I can hear the gpu's motor going at full power, and eventually I hear a loud beep, then the reset occurs.
At least this seems to be a software issue and not a hardware issue, but very frustrating nonetheless.
DELL-Sundeep B
1 Rookie
•
874 Posts
1698
0
Posted July 11th, 2013 17:00
Hi egr0,
Good to hear that; I appreciate your technical expertise. As you are facing issues, I would suggest you to remove the video card from system and update the system BIOS to latest version from Here.
Note : Please save and close all running programs and documents and disconnect all external peripherals (printer, flash drives, external hard drives, etc) and connect the computer to a surge protector before updating the bios.
After updating the BIOS, you may install the video card and update the nVidia drivers. You may refer to link Here for a guide on clean installation of nVidia drivers. You may refer to Owner's Manual Here for proper installation of parts.
Note : Please follow safety instructions given in manual before replacing the parts.
If the issue persists, you may try installing an older version of drivers and see if it helps.
As suggested earlier you may also check the video card on an alternate system to verify the card functionality.
Hi,
Thanks for giving me such detailed steps to follow. I asked elsewhere and was told my PSU wasn't good enough, that I'd need a PSU with a max load of about 750-800 W. Is that the issue or is it definitely the BIOS? I'll update my BIOS in the meanwhile and see what happens.
DELL-Sundeep B
1 Rookie
•
874 Posts
1698
0
Posted July 12th, 2013 13:00
Hi egr0,
As shared earlier GTX 650 requires a minimum power supply of 400 W and you have a power supply of 530W in system. So, the issue does not seem to be with power supply.
Would like to know if you could use the video card with an alternate system, to check its functionality. If possible, this is a good way to isolate other possibilities.
I gave BIOS update as it expands the system functionality by adding some necessary updates in system BIOS.
Keep me posted with the findings.
Hi,
I'm having the same problem with a Geforce 210 (Asus, 1 GB ddr3)and I was wondering if you found a solution to fix this.
The computer is a Dell Inspiron 530, 300w PSU, Intel dual core CPU, 3GB of RAM. The OS is Windows 8.1 64bit.
I tried also with a Quadro K600 taken from another computer and perfectly working, but it gave the same problem. I thought it could be the power supply since 300w are not a lot, but both GPUs need quite little power and it worked well with a Geforce 3400gs (rated 71w max) that I borrowed from a friend (the quadro draws 41w...).
My bios is already the latest version (1.0.18), and I tried different driver versions.
I managed to get into the diagnostic utility in the Dell DVD and did some tests; the video memory read/write test failed.
Thanks

DELL-Sundeep B
1 Rookie
•
874 Posts
1698
0
Posted July 10th, 2013 16:00
Hi egr0,
The monitor should be connected to GPU, as the video output is directed through GPU when an external video card is connected to the system. Dell ships Inspiron 530 system with 300W power supply and has not tested this system with GTX 650. The minimum power supply requirement for running GTX 650 is 400W. However, based on your system specifications the video card should work with your system.
Please share if you are able to see Dell logo when you connect the monitor to GPU. If not, I would suggest you to reseat the video card and reconnect the 6 pin pci-e connector as the GPU will not produce any display if it does not receive adequate power.
You may also test the video card on an alternate system (if available) to check its functionality.
Do reply with the findings. Will take it further from there.