
UNSOLVED
BIOS A07 for Dimension 8400 buggy?
I downloaded the A07 BIOS update for the Dimension 8400 and flashed my unit yesterday. Since that time I've had two distinct problems on bootup.
1. The computer refused to recognize my DVD player.
2. When I returned home from work tonight and booted my computer the POST apparently ran OK. But then the fan that cools the CPU began running at what sounded like triple speed. (It was blowing powerfully enough that it was displacing the window blinds behind the computer.) And nothing else happened. There were no orange test lights on the computer, but it would go no further and the orange light on the monitor indicated I wasn't getting a video feed.
I've flashed the BIOS on literally dozens if not hundreds of computers and this is the first problem I've encountered.
Responses (9)
Solutions (0)
- Debewley, A few things..... try going into the BIOS Setup and pressing the ALT + F keys to see if the system will redetect the drives. Secondly, trying to reflash the BIOS with the same version may not work as the Dell flash program may detect the same version number installed and prevent it. The solution then is to flash back to an earlier version and then back up to A07. Last, but not least.... in the earlier A06 BIOS release several 8400 owners reported drive detection problems after upgrading the BIOS to that version. Possibly the bug in the A06 BIOS version was carried over to the A07. The solution for them was flashing the BIOS back to version A05 which can be found by clicking here.
Thanks for the responses!!
I've only had the problem with the computer refusing to recognize the DVD drive one time after mulltiple reboots.
I tried flashing it with A07 again last night and rebooted from a cold start several times without difficulty. However, when I returned from work again today I had a repeat of the CPU fan gaining in speed until it is running incredibly fast. The three lights on the keyboard flash once, as is normal, but the computer progresses no further as far as a boot.
After the first failed attempt tonight I reseated the two DDRs and the video and sound card and disconnected all items not necessary for a boot. That didn't make a difference. Finally after about 8 attempts I got a normal boot.
I've flashed it back to A06 and had two successive good boots since then. I'll now leave it turned off for a while and attempt a boot again.
I notice the only issue A07 intended to correct were boot issues when a USB media reader is attached. I don't have a USB media reader attached BUT I do have a USB flatbed scanner that initializees when I power the computer. I'm beginning to believe that there might be some issue there.
Thanks again for your help and suggestions.
- A07 or not, I recommend turning off Fast Boot to anyone experiencing intermittent drive/device detection on an 8400 at boot. It cured my flakeys 100%. I got the suggestion right here.
Besides, you never have to reboot XP anyway, and do I have a bridge to sell you.
(Back to the topic - A07 is on one machine here so far - no probs, but I don't keep USB drives attached full time, just the monitor hub and one printer.) I rolled back the BIOS to A06 last night. Since then I've rebooted from a cold start several times without any problem. I'm really inclined to believe this is an issue between A07 and my USB scanner.
Yes, my 8400 is still under warranty also. But that doesn't mean I want to spend hours on the phone with tech support. Nor do I want some ill-trained Dell contract tech playing with it. I work in IT and watched one of those guys change a motherboard with a bad PS2 port one day. After the new motherboard was in, (if I recall correctly this was on an Optiplex GX 260), he forgot to connect the cable from the front panel to the motherboard. I watched him struggle with it for 5 minutes before I finally pointed out to him that it would probably boot better if that were connected. I really don't want ANYONE like that anywhere close to my computer.
To conclude; A07 appears to offer limited benefits. As per Dell, it is intended to address an issue with those people who have a USB media reader attached and only that issue. On the other hand it would seem that it adds another problem of a conflict with other USB devices.
Thanks for the input from all who responded.
- I usually upgrade to the newest BIOS flash but A06 caused some real problems on my 8400. I would get black screens and a flashing cursor at boot. The folks here pointed me to the posts re:that problem and a flash back to A05 cured the boot lockups. Sometimes it really is best to not fix a working system. And I only trust me to work on it considering what I have seen and heard at times with pc repair.
Regards,
John O.

ronss
2 Intern
•
2060 Posts
•
3 Points
487
0
Posted August 30th, 2005 05:00