GGCAN

updated

17 years ago

G

GGCAN

1 Rookie

•

68 Posts

0

42242

October 25th, 2009 14:00

After upgrading to Windows 7, Media Center won't display TV signal.

Just upgraded on Oct 22 2009 to Windows 7 Home Premium 32 bit and have an XPS 410 computer.

My TV tuner is ATI Theater™ 650 PRO Combo Analog/Digital TV Tuner and worked great on Windows Vista SP2 32 bit Home Premium.

Now trying to watch TV via Media center I can hear sound, but get no picture.

I went to the AMD site and don't see any Windows 7 driver updates, only Vista.

Many times (not always) I get an error message on  Media center stating no TV tuner found.

Can someone reply back if they've found a solution or if we have to wait for a driver ?

thanks,

  • robbiecc

    11 Posts

    2026

    1

    Posted January 7th, 2010 20:00

    Ok, it arrived this am and so far not bad.  wintv software kinda a pain, but set up with media center pretty good.  so far just have it hooked up to directv with a video cable.  video not the best but read it gets better using an s cable which i'll get tomarrow. the remote works good with media center and controlls the sat box.  not bad considering i've never been a fan of media center.  trying out the dvr part, know how that works when it's done.  glad it appears to play nice with directv2pc (seems alot doesn't) and does well with dual monitors-had tv running on the monitor and playing a recording with directv2pc on 2nd monitor(tv)

    1st impression is good, does what it says it will and so far it works well under win7.  been too busy playing with it that i haven't had a chance to check for updated drivers/software-do that also tomarrow.

  • GGCAN

    1 Rookie

    •

    68 Posts

    1293

    1

    Posted August 5th, 2012 16:00

    I see this is still not answered, even though robbiecc pretty much answered it.

    I have the 750 PRO now and that works very well.

    I just got a new pc (Alienware Aurora R4 (love it !) and thought about purchasing another 750 tuner, but remembered I had the 650 still.

    Installed the 650 into the new pc and downloaded the current ATI driver (2010) which now seems to include the 650.

    It works as well.

    So problem is solved...ATI Theater 650 PRO does now work again after the most current driver is installed.

  • Mary G

    6 Operator

    •

    20095 Posts

    1357

    0

    Posted October 25th, 2009 15:00

    Make sure to visit the Windows Upgrade Site to see if there's a driver available. You should have done that right after installing Win 7. You can try the vista driver if update site doesn't have one. Did you run the upgrade advisor to see if there's a problem with that tuner? Run it now to see what it says.

  • Rongetbud

    4 Posts

    1357

    0

    Posted October 25th, 2009 15:00

    You will probably have to go back and reinstall the original drivers for your ATI Theater (until the Windows 7 drivers become available).  Check in the control panel for device manager and see if your TV tuner is listed with a yellow question mark.  Go to the Dell support page for your computer and locate the original drivers. Download and install.  (This worked for me for my Sigmatel sound card that Windows 7 identified as a ATI HD device)

  • Mary G

    6 Operator

    •

    20095 Posts

    1357

    0

    Posted October 25th, 2009 17:00

    I'm suspicious that device manager says there is no problem. I'm also wondering why you get sound, but no picture, which is not right if it's a driver. Do you get snow or static? Maybe it's a setting in Media Center or in the tuner and not a driver problem. I installed Win 7 on an old Dim 8400 with an old tuner and it worked right from the start. I did have to go through the setup again in Media Center Tasks. Start from the beginning and set up the tuner as if you just installed it. Make sure the connections are OK. Did you reboot the computer? You might try the ATI Knowledge Base or ATI support. Instead of the Dell driver, which didn't work, try the one for vista at the ati site.

  • GGCAN

    1 Rookie

    •

    68 Posts

    1357

    0

    Posted October 25th, 2009 17:00

    Thanks for the suggestions, but none of them have worked and I still have the same problem.

    I checked the AMD site for Windows 7 drivers and none are available for the type of ATI 650 card I have. The only one that has a driver for Windows 7 is the ATI 750 TV tuner.

     Also ran the Windows 7 upgrade advisor several times before installing Windows 7 and NO message was issued that there may be a compatibility issue.(It actually came back with this message for the ATI TV tuner stating 'ATI Unified AVstream Driver ATI Technologies - Compatible - The device is compatible with Windows 7.)

    I tried going back to Dell's original driver and the same issue occurs. (Also checked device manager and no issues there, it states the driver is working properly).

    I also checked the Windows 7 forums and apparently it's not only the ATI 650 TV tuner that is having issues with Windows 7 Media center, but there are many other types of TV tuners having the same problem.

    As stated, my TV tuner worked with Vista very well and I think I'll just have to wait until a Windows 7 driver becomes available for my TV tuner. (or and I hope this isn't the case, may have to purchase another that is compatible with Windows 7).

    (PS....I also had the sound problem with Vista and fell back to Dell's version and all worked fine...tried doing the same for the TV tuner...but doesn't work).

  • GGCAN

    1 Rookie

    •

    68 Posts

    1357

    0

    Posted October 25th, 2009 18:00

    No static just a black screen, but there is sound (think that's because my set top box has a sound input connected to the PC).

    Device manager states device is working properly, but like I mentioned previously, there are several other people at the Windows forums that are stating the same as myself for the same type of TV tuner, as well as several other tuners.

    Originally when Windows 7 was installed, Media center was working and I could view TV signals. (But only after a bit of tweaking, as when it first started up, I received a message of 'No TV tuner found' - again this message is listed by several people at the Windows Forum)

    I went to the TV set up in Media center (as I thought the message No tuner found meant it required me to re set up that panel) and that's when the problems started to occur. (I rebooted right after the TV set up change and then couldn't get the TV tuner to work).

     I've rebooted several times, even tried a system backup to when the device was working to no avail.

    At times I also get a message that the TV tuner is already in use (as others mention on the Windows forums).

    The vendors site only has drivers at the moment for Vista and previous Windows versions, so I'm hoping a Windows 7 driver becomes available very soon. I will be calling them first thing Monday morning, but it seems very suspicious to me that at the Windows forums there are many others with this same issue.

     

  • GGCAN

    1 Rookie

    •

    68 Posts

    1357

    0

    Posted October 26th, 2009 07:00

    I've actually gone to the Microsoft site and tried to find a valid driver for my TV tuner for Win 7 and there are none...the only driver available anywhere is for Vista 32 and 64 bit.

    At the Microsoft site I went to the Forums and that's where I found many others with the type of TV tuner I have and they had the same problems. As well, there are several other TV tuners that seem to be having the problem as well.

    It seems only some TV tuners will work and the rest of us probably have to wait until a driver for Win 7 is available.

    I can view DVD's, video's, TV shows that I already pre recorded on Vista Media center with no problem...picture is there and sound.

    It's only when I try to watch a TV show on Windows 7 Media center  that the screen comes up blank and I get a message of either the TV tuner is already in use or TV tuner not found.

     

  • GGCAN

    1 Rookie

    •

    68 Posts

    1357

    0

    Posted October 26th, 2009 09:00

    Well, just called ATI/AMD they told me that the Windows 7 driver is not yet available and they can't say an exact date that it will be available.

    The person just said to hang in there until the driver comes out.

    Problem solved.

  • cw14

    8 Posts

    1357

    0

    Posted December 29th, 2009 17:00

    GGCAN,

    I have the same tuner. Their site appears to have an updated driver for it, but they're a little vague. Have you had success?

    Btw, I bought mine pre-installed on an XPS 210 right after Vista came out and I had all the same problems you had after your 7 update. It took me forever to get Media Center to find it.

    cw