
UNSOLVED
8250 Sluggish Performance
I noticed that on my new Dimension 8250 whenever there is a good deal of HD access (say, installing a game), the rest of the system slows to a crawl. I've never noticed such slowdown before on other systems (98, 2000), even when HD's have been thrashing. Even XP's GUI slows down.. screen updates are noticably slower. Any ideas on this?
I've pruned my running programs and services down to the bare minimum. I also run a Diskeeper defrag every night, and mean to do a Boot Time Defragmentation soon (I ran one not too long ago, just after getting the machine). I've also checked to see if DMA was enabled on my drive, and it is, so I'm not stuck in PIO.
I can almost understand slow HD performance as far as launching programs, but GUI slowdown? I haven't seen it this bad in YEARS. I'm using the "Windows Classic" skin for XP... would having a skin applied do this?
It doesn't seem right that a brand new P4 3.0ghz should be running this sluggish...
Responses (9)
Solutions (0)
512 megs of RDRAM, PC2100 I believe. I don't have the system in front of me now, but this is off my invoice, which is online..
(2) Rambus Inline Memory Module, 256, 533MHZ, 128X16, 8C
And this is the drive:
Hard Drive, 60G, IDE (Integrated Drive Electronics), 7.2K, 60G/P, IBM-VAN2
I'm guessing it is an IBM, given the "IBM". Maybe a Deskstar?
I haven't tried running with HT disabled. Will the processor still run at full speed with HT disabled? Naturally it won't feature the hyperthreading, but I'm not too worried about losing that. Will XP freak out, seeing as it will probably think it lost a processor?
Caerdwyn - I can empathize with your situation.
By the way, all 8250's use PC1066 RDRAM, PC2100 is DDR SDRAM (similar to what the 4550 uses). The 8250 uses the fastest (at the time the 8250 was released), albeit, more expensive RAM.
Your 3.06ghz should scream with 512mb of RDRAM, there's no excuse for it not to. As many might suggest, be sure to defrag, run a good registry fixer (JV Power Tools), AdAware 6, or do a clean install of XP. There are a lot of tweaks out there too, but they should not be needed.
I have a 2.4ghz and 256mb of RAM. My old machine is a housebrand AMD XP1700 (1.467ghz) with 512mb PC2100 DDR. I don't know what to make of it, but my AMD seems to be faster opening applications and running games. I realize that my AMD machine has twice the RAM, but everyone says that the 8250 should run fine on 256mb (the standard amount it comes with. Both of my OS's are XP Home with a clean install from a formatted drive and both have a 7200rpm HD, but my Dell has the benefit of a larger 80gb WD SE hard drive with the 8mb cache.
My son installed Tony Hawk PS3 on my Dell and the machine had a coronary. The game played, but I noticed that just about everything else slowed down (after shutting the game down.)
The bottom line is that my Dell is slower (at times) than my AMD machine and I'm not happy. At some point I will bump up my RAM, but I can tell you that I won't buy another Dell or P4 if this is what I can expect.
Thanks for the reply. Yes, normally my machine does scream, but it's that "morning after" effect that boggles me. This seems to only be present in, out of my latest crop of games, Unreal 2.
I'll have to keep an eye on it. I'm still curious about enabling/disabling Hyperthreading, but I don't want to blow something up if I did so. I'm speaking from an OS standpoint, since I have very little experience with how an OS handles a dual-processor machine effectively going from 2 CPUs to 1 (since Hyperthreading fakes 2 CPUs).
I may soon invest in more RAM, though I don't foresee updating my hard drive any time soon. A small RAID array would be nice... two drives, RAID 0... I'm sure that would be pretty speedy, even if it was an IDE RAID. Those 8 meg cache drives also sound nice.. shame I couldn't have nabbed one.
Message Edited by Caerdwyn on 03-10-2003 07:02 PM
All hope is not lost. My problem was not with hardware. I found the culprit.
We don't have DSL or cable modem where I'm at. I use a satellite modem. I upgraded my satellite modem software and all of a sudden my system is running like a champ. Live and learn.
Good luck with that 3 gig system. I think the consensus is that 512mb is more than enough for the system. I dunno, I kind of like overkill. As soon as PC1200 RDRAM is the new standard (for RDRAM) the PC1066 should drop in price quickly. It's way too expensive right now.
- Caerdwyn,
Mentor00 does have a point about virtual memory but with 512MB of RDRAM I doubt you need to worry about this...unless you have several very memory-intensive apps running in the background (i.e. - Norton SystemWorks, McAfee Security Center, practically any spyware component, etc.).
There is much to be said about HyperThreading, all of which is posted on numerous web sites so I won't repeat it here. You can click the links at the end of this message to read some articles that I think may apply to your particular situation. To answer your questions though, no, XP will not freak out if you disable HT and yes, the processor will still run at 'full speed.' It should be more clear to you why this is after you read the first article I've provided a link to. Go ahead and shut HT off in the BIOS then see if there's any performance change. Post back with results.
HyperThreading Threads Its Way into Application
Intel's Pentium Performance Hangs on a Hyper-Thread
Is The Games Industry Ready For HT? Caerdwyn, if you have 256 memory and are trying to run Unreal II, then your system is probably doing a lot of swapping between the hard drive (virtual memory) and real memory. I have a full boat and I glanced at the task manager in the middle of a full blown Unreal II session, it was using 347meg of memory to run. This may apply to some of your other games as well and if anything else is running in the background you're eating up processor cycles and memory.. I'd say you need at least 512 mem to improve your game performance.
MENTOR00
100% OEM....8250, XP Pro sp-1, 1.5 rdram 1066, 200hd,1800fp, IBM 8514, audigy2, ada 995's, 9700pro, HP d145, Laserjet III, 16x Lite-on 163, 4x Nec 1100a.I have the same problem..and almost hte same exact dell pc as u, I'm glad to know that it isn't just me hehe :P there are times where my old pc which was a just about the same as a P3 with 300 or so megs of ram..ran much better then this system..
I know that dell may not like what I am going to suggest my brother who is a computer tech gave this advise to me but I haven't had the heart to do it yet..hehe He worked with other pcs like dell, gateway..and alot of times the would whipe the system..remove all the stuff that the companies put on the computers..have any of you tried that? has it made the performance better? I haven't done it yet because well for one I don't know how..and as I sayed before I haven't had the heart yet to do it.
I think it makes a big difference in performance to have a clean install of your OS. I remember when companies provided restore disks with the OS and bloatware incorporated. You couldn't do a clean install. Thank goodness, Dell doesn't do this to us.
In my opinion, help and diagnostic software from computer companies is a waste of your time and resources. If you can make your way around these forums you'll never need that stuff. I'm not an expert, but I know how to format and install programs (ok, maybe a few other things too). I learned a lot of what I know from friends and forums like this one.
I frequently try out programs, but usually dump most of them, leaving my registry cluttered. Trust me, your machine will perform better in the long run if you reinstall a clean copy of the OS every six months to a year (depending on how junked-up your system gets.)
To have a fast machine, make sure your system is balanced. If one area is weak it can slow the whole system down:
1. Buy a fast CPU, fast RAM (DDR or RDRAM), a fast hard drive (7200rpm), and fastest connectivity you can afford (DSL or cable modem for most).
2. Clean install your OS and other software.
3. Defrag, spyware check, and use a good registry cleaner (such as the freeware "JV power tools")

The_Namek
2 Intern
•
2794 Posts
170
0
Posted March 10th, 2003 18:00
A few questions for you. How much memory is in that 8250? Have you tried disabling HyperThreading in the BIOS before installing games or doing whatever else you're doing that's ramping up hard drive access? What brand of hard drive is installed?