UNSOLVED

arlmed

updated

19 years ago

A

arlmed

11 Posts

0

1951

July 14th, 2007 19:00

4600c

Help anyone please. My 4600C all of the sudden stop responding, the screen went black. It did not respond to CTRL/ALT/DEL either. I manually restarted it by holding down the power button, it went off, waited 20sec. and pushed the power button again. I got the green light,but, again, nothing on the screen, no noise from hdd kicking up or anything at all, no beep whatsoever. It is NOT a monitor problem by the way. Pushed the power button again, waited, and restarted it but this time a steady flashing yellow light from the power button only. Tried off and on again 3 times still the same. Please help. Thanks.
  • Bobman101

    693 Posts

    150

    0

    Posted July 15th, 2007 09:00

    The flashing yellow light usually indicates a bad PSU. The fact that the fans and HDD aren't running and there's no beeps do suggest this.

    I believe the 4600 c version has a proprietary PSU, meaning it NEEDS the PSU made for it to work. If it was a regular 4600, they can take almost any standard ATX PSU. I don't know how much it'll cost for the PSU, but if the 4600c motherboard will fit a regular 4600 case, you may be able to find a regular 4600 case on eBay and get a new standard PSU on Newegg for cheaper than the proprietary PSU.
  • arlmed

    11 Posts

    150

    0

    Posted July 15th, 2007 15:00

    Thanks so much bob. I called Dell twice and sadly got 2 useless reps, gave them the part number, but kept asking me what is it for, put me on hold, then told me no they don't have it. Maybe eBay is the way to go. Thanks again.
  • aitros

    1 Message

    150

    0

    Posted August 12th, 2007 23:00

    I have the same issue on my 4600c
    It ended up being the AGP port on my main board.
    I had to unplug my video and use onboard video
     
    it's under warranty but DELL wont replace it