
UNSOLVED
MIO board issue
Alienware Aurora bought in 2010.
Nothing is working in alienware CC. I ran AlienwareAlienFXTester.exe and it says the board is not detected. I'm trying to run "Dell Diagnostics" because that's what every post about this says to do but all I have is "Alienware Diagnostics" and there's nothing in there about testing a "Master I/O something-or-other". Is the Alienware Diagnostics the same as Dell Diagnostics? I hope so, because the only Dell Diagnostics that I can find is from 2005 and it doesn't support this computer that was bought 5 years later.
I doubt very much that there is a problem with the hardware as this was working perfectly before I reformatted. I'm now using Windows 8 Professional 64bit.
Responses (16)
Solutions (0)
Turn on or boot computer
Press F12 a few times
Press down arrow
Select "Boot to Utility Menu"
-or-
Insert Diagnostics CD (the one you created from "Dell Diags CD Creator" download)
Press F12 a few times
Select CD/DVD-ROM drive
... then
Test System
Custom Test
- Master I/O USB Device (MIO Board)
Run Test
(it should say Passed)
To see if MIO Board is connected and communicating with MotherBoard
USB, USB AW G2 Desktop, USB Device Ping Test
If the above tests Pass, you can also test:
Fans, Sensors, LEDs, MIO Cable Detections
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.en.community.dell.com/.../20128296.aspx
Try Power Dissipation fix before Diags.
You must get Dell Diags to detect MIO-Board (outside of Windows) before you can proceed.
Did you find the proper Dell Diags? It's NOT a Windows program. It runs from BIOS boot (outside of Windows).
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.I tried the power dissipation fix and ran Dell Diagnostics. I'm accessing Dell Diags by pressing F12 at the BIOS loading screen and then selecting the utility partition in the menu. It doesn't say Dell Diagnostics anywhere but I assume that's what it is.
In any case, there is no MIO-board in the list of things to test. (inside the custom test interface) I took a look at this thread you linked me but I don't think it applies to my situation because there doesn't seem to be any information on troubleshooting a disconnected MIO-Board. I know I said that it likely wasn't a hardware problem but I'm not married to that idea. If I need to open her up and play around inside, just let me know what I should do.
Thanks!
I took a look at this thread you linked me but I don't think it applies to my situation because there doesn't seem to be any information on troubleshooting a disconnected MIO-Board.
Yes, that is the right page. Read carefully.
If the MIO-Board can't be detected in Dell Diags, it's usually because it's dead, bad, locked-up, or bricked (due to a failed MIO Firmware upgrade).
I went ahead and spelled-out how to check the internal wiring. However, if you are up to troubleshooting at this hardware level ... I shouldn't have to.
Good Luck.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.You can try re-seating cables:
1. Motherboard's USB-1 header to MIO-Board.
2. MIO-Board power (larger 4-pin molex)
... and then plug back in and repeat all other diag steps.
If the MIO-Board still doesn't respond, it will have to be replaced. Normal Aurora (non-ALX) and ALX machines use slightly different boards.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.NataliaatAW
2 Intern
•
835 Posts
1022
0
Posted March 7th, 2013 11:00
Mr. Sinatra,
The ePSA is also a diagnostics test, is the newer version of the PSA:
well, i have ePSA and ran the tests, and no errors were found.
but i didn't see a "power dissipation test" or anything about the "MIO" board itself, like the lights and what not.
in other words, i can't install 2.8.8.0 and yet the ePSA gives no clues whatsoever as to why. so b/c of that, i have to send this thing back to the factory so u guys can figure it out.
can't say i'm happy about it.
sorry Tesla, i forget what thread i'm in.
its a M14x R1.
part of the problem though, as i see it, is that terminology is not defined straight forward anywhere, like a glossary. i now know that ePSA is basically just the dell diagnostics, but that is not in and of itself obvious.
by the same token, i don't really know what the "MIO board" is, if its different from the motherboard or is the motherboard, and if it should have its own category in the ePSA. again, this is not explained anywhere i have looked. i don't know what it is i don't know, but clearly, i don't know much. :(
when in ePSA, i did not see anywhere to scroll. the last thing was the memory tests, there shouldn't be anything after that, right? shouldn't ePSA be aware that a MIO board should be present, but isn't reporting itself if that is in fact the clue?
No problem.
If you have your own dedicated thread, point me to it. If you don't, you should start one and start at the beginning.
Right, so you have an AW laptop ... different story. All my troubleshooting is focused towards full-sized AW Desktops (that have dedicated MIO-boards) because that's what I own.
On an AW laptop, there is not a dedicated MIO-Board ... just a MIO Circuit on the motherboard. You can still do the Power Dissipation fix, but it's a little different. The AW laptop's version of Dell Diags/ePSA is obviously different. I've never been able to get someone to run it (on a working perfectly laptop) and verify that the MIO-Circuit does indeed show up a testable or that's it's even possible.
Are you under extended Dell warranty? What country are you in?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.

Mustack
3 Posts
1025
0
Posted September 22nd, 2012 19:00
Thanks for the quick reply Tesla.
Master I/O USB device was not in the list for custom tests. How should I troubleshoot this? I know you've probably answered this a million times already but I found a lot of mixed information about this and I've been trying things for 4 hours now so I appreciate you copy/pasting it one more time for me.