
UNSOLVED
A
adamhooper
2 Posts
0
48756
June 5th, 2015 17:00
Alienware X51 R1: "legacy mode" grayed out in BIOS, can't flash
Hi there,
I use Linux, and I'm a computer expert. My X51 BIOS is at revision A01 and I want to upgrade it ... but I can't. (I've tried A02, A03, A06, A07 and A14.)
My boot mode is set to UEFI, and I cannot change it: the BIOS option to change it is grayed out. I've restored default settings, disabled all CPU/chipset features, unplugged the CMOS battery and flipped the BIOS-reset jumper, and the option remains grayed out. I've unplugged all SATA cables, and the option remains grayed out. I know the usual response is, "flash the BIOS" but I can't because....
The BIOS-flashing program is a DOS executable. DOS can't run in UEFI mode. I've downloaded Windows evaluation USB images and booted them to get a command prompt; but the 64-bit Windows rescue image refuses to run the BIOS-flashing program (because the rescue image doesn't have a 32-bit compatibility layer, and the program is 32-bit), and the 32-bit Windows rescue image won't boot (because this machine is 64-bit UEFI). I've even run 32-bit Windows 8.1 in VirtualBox to create a "rescue USB image", and that rescue image won't boot (because it's 32-bit).
All that to say: I can't boot DOS, because I'm in UEFI mode. I can't boot 32-bit Windows, because I'm in UEFI mode. I can boot a rescue version of 64-bit Windows, but it refuses to run a 32-bit executable.
I can't install Windows, because that will wipe all my data. (I use LVM and an SSD cache drive; I have little hope of preserving my data if I repartition my drive.) I have no spare hard drive.
Please help answer any one of these questions:
- How can I enable Legacy boot mode if the option is grayed out?
- How can I flash the BIOS if Windows is not installed and I'm in UEFI mode?
- How can I flash the BIOS on Linux? (I've extracted .bin and .rom files from the executables, but I don't know what to do with them and I don't want to make a mistake.)
Responses (0)
Solutions (0)
