UNSOLVED

Doug9999

updated

7 years ago

D

Doug9999

1 Rookie

•

28 Posts

0

2531

October 4th, 2019 17:00

Precision 3510 - display turns off after unplugging

The laptop's LCD screen will turn off after a few seconds, after unplugging the machine, or if running on battery.

Observations:

  • only when on battery / unplugged and windows
  • no problem if always plugged in
  • plugging in does not turn display back on
  • power cycle or sleep/wake the brings the display back
  • the LCD backlight remains still on
  • an external VGA monitor works, even after screen turns off
  • no problem in setup BIOS (screen never turns off)
  • tried setting the display to always on (power setting) - no effect
  • tried the function/presentation mode button - no effect
  • started today after not using the machine for 2 weeks.  It remained plugged in and asleep.

This is apparently a common problem across Dell, but so far none of those solutions have worked.

-

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    2296

    0

    Posted October 5th, 2019 05:00

    Welcome to the Dell Community  @Doug9999 

    Have you tried to reset the BIOS to default???

    Reset CMOS by removing the CMOS battery???

    Update the BIOS, Video and Chipset drivers???

    Best regards,

    U2

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    2282

    0

    Posted October 5th, 2019 06:00

    @Doug9999 

    What BIOS version do you have installed now???

    What Intel graphics do you have???

    Regards,

    U2

  • Doug9999

    1 Rookie

    •

    28 Posts

    2287

    0

    Posted October 5th, 2019 06:00

    I uninstalled the Intel graphics drivers and immediately (before reboot) I was able to unplug the machine without the display going black.

    HOWEVER.  After reboot, now the computer will freeze completely if I unplug the power.  Everything stops, forever, until hard reset.  

    It also freezes for a bit during windows startup now, but usually continues at some point.

    UPDATE:  I reinstalled the intel video drivers and now it's the same behavior as before - display turns off if power is removed.

  • Doug9999

    1 Rookie

    •

    28 Posts

    2291

    0

    Posted October 5th, 2019 06:00

    I updated the AMD video drivers but there is no update for the Intel video drivers.

    Regarding BIOS/CMOS I actually did all that a few weeks ago, fixed it, and hadn't touched the computer since then.   It actually got pretty ugly:
    https://www.dell.com/community/Latitude/Unable-to-update-BIOS-of-Precision-3510/m-p/7372526

    But now I'm wondering if the BIOS update had the side effect of making the laptop unusable on battery.

  • Doug9999

    1 Rookie

    •

    28 Posts

    2280

    0

    Posted October 5th, 2019 06:00

    The latest BIOS, and the latest Intel video driver, both from the 3510 support downloads page.

    BIOS:  1.21.4
    Intel 530 video drivers:  26.20.100.6888

  • Doug9999

    1 Rookie

    •

    28 Posts

    2233

    0

    Posted October 7th, 2019 08:00

    I've discovered that the 1.19.3 firmware fixes this problem, and installing 1.21.4 brings it back ---- so it's an issue strictly with 1.21.4.

    Of course, that means I can't use those urgent security fixes in 1.21.4 (!!!)

    The solution was inspired by this resolution here:
    "Had the same issue on my Latitude 5570, and can confirm that only a rollback to Bios v 1.19.3 was resolving it"
    https://www.dell.com/community/Latitude/Screen-turns-off-when-unplugged/td-p/7324453
    Also -  this remark, which summarizes my recent experience with a number of Dell software issues:
    "It's quite unfortunate that such a basic quality validation was missed by Dell before releasing the new BIOS."


  • BD78

    1 Message

    1419

    1

    Posted May 7th, 2020 14:00

    I was having the same issue and just tried updating to Bios v1.22.3 and this so far seem to have resolved my problem.  I've had the screen on for a whole 2 min now after booting and then unplugging the power at the logon screen. 

    So it looks like the latest driver resolves the issue and you don't need to downgrade anymore.

  • jurxburx

    1 Message

    1143

    0

    Posted September 2nd, 2020 12:00

    Worked for me Thanks!