I have a Latitude 5501 laptop. The problem I am experiencing is that it is not possible to put the computer to sleep. When I intend to do so (from within the start button, power button on the PC, or automatically after some time expires set in power options), the screen goes blank, the power button led is still on and the PC fan keep spinning. If I press a a key or move a mouse, the screen instantly turns on. The screen has the screen lock on, but I dont need to enter the password.
But after upgrade to Windows 10 2004, this option disapears from registry and even manual add wont help. I have extactly same issue. After I put computer to sleep, fan still spinning, power LED is on.
@Bouda05I have actually tried the solution you have mentioned, since that registry entry was available for me- it kind of worked... The PC goes to a regular sleep (takes around 5 seconds to do so). Then when you wake it up via power button, it goes to that semi-sleep state it was going previously. In order to take it out of that state I need to press any keyboard button. But then again, I am using windows build 1909...
I have a XPS 7590 and now after this build I cannot undervolt it and I have the same issue as you guys.
Dell should take this more seriously because this is dangerous and so annoying to let your laptop closed and come back after a while and notice it is hot and the battery has being drained, because it actually never goes to sleep. It's dangerous, because if you save your laptop in your backpack who knows what could happen.
No updates at all. The only workaround is the one posted. In my case there are 2 major problems:
The sleep like feature I managed to get working is not working correctly (mentioned reasons),
Even though the power plan is set to never go to sleep, after couple hours it does and its not possible to wake the pc up. I have to hold the power button for couple seconds to hard power off the device.
IN general, I am very unsatisfied with this PC power management system. The fan is always on and very loud, no matter that the load and temperature is low. I feel like it turns on randomly and never goes off. I am considering turning the block sleep on in bios, since this feature doesnt work.
Hi, I am having the exactly the same problem (Dell Latitude 5501, Windows 10 Pro, version 2004). When attempted to go into the sleep mode, fan is on, power button light is on, num lock light is on and network is on (I checked from another computer using ping command). It only turns off the screen. I talked to dell tech support and he says it is working as designed. I don't agree with him. I still have the ticket opened with Dell. Any updates on this?
Unfortunately still no updates, but in my support case Dell say that this is an issue, not feature by design.
Main issue is only S0 sleep state available but no S3, which is the best for laptops.
Unfortunately, there is no way how to disable S0 and enable S3 by software changes, you can only modify BIOS.
Here is result of powercfg /a:
The following sleep states are available on this system: Standby (S0 Low Power Idle) Network Connected Hibernate
The following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. This standby state is disabled when S0 low power idle is supported.
Standby (S2) The system firmware does not support this standby state. This standby state is disabled when S0 low power idle is supported.
Standby (S3) This standby state is disabled when S0 low power idle is supported.
Hybrid Sleep Standby (S3) is not available.
Fast Startup This action is disabled in the current system policy.
bootstrap18
1 Message
3976
0
Posted May 25th, 2020 01:00
Take a look into the BIOS Options: Power Management -> block Sleep