XPS 13 -9343 No Display with 8 Beeps and 4Amber + 1 white
Hello Experts,
Looking your help to address the issue that I am currently having in my Dell XPS 9343 (i7-5th Gen/ QHD +Touch screen). When I press power button, no display and it bees 8 times and the front power led blinks 4 Amber + 1 white. Power +D button shows switching screen color and it mean that passes the test. if I connect external monitor, I see a dell logo only on the external monitor and it continue to beeps (8time) and the led Blinks. Tried Power +Fn and Fn+F1 and non of them works.
Let me know your advice on how to address this issue. Is it a display issue or motherboard issue.
Since the display clearly works correctly, that would leave the mainboard as the prime suspect. Before replacing it, check to make sure the wiring harness is properly connected to the system board.
8 beeps means failure to detect the LCD. If you haven't opened the system to check the cable that connects the display to the mainboard, that's next.
If the panel shows the self-test, it's OK -- if the cable is bad, in most cases you'll need to replace the display assembly. See below.
The flash pattern means a dead or faulty battery.
At 12 years old, I would carefully consider the economics of replacing the mainboard, which is the likely faulty part -- particularly if you also need a battery. Its value is under $100, complete and working, so any repair is going to exceed the value of the system.
I've already disconnected and visually inspected the eDP cable and motherboard connector — no visible damage. I haven't checked the panel-side connector yet.
The laptop also shows exactly the same 8-beep POST failure with the main battery completely disconnected, running on AC power only.
I've found a tested replacement 9343 motherboard for around €40, so replacement is economically reasonable in my case.
One question: could a faulty LCD detection circuit on the motherboard cause these symptoms even though the Dell logo and LCD self-test display correctly?
Yes, but it's also entirely possible that there's a power issue that could be the cause. There are many components on the aged mainboard that could have failed.
Also bear in mind before spending, that any replacement board you find will be similar in vintage to the current one -- there are no guarantees with any parts for a system that's as old as this one.
ejn63
12 Elder
•
31846 Posts
•
156268 Points
354
0
Posted August 31st, 2020 03:00
Since the display clearly works correctly, that would leave the mainboard as the prime suspect. Before replacing it, check to make sure the wiring harness is properly connected to the system board.