Anoban

updated

4 years ago

Closed

A

Anoban

12 Posts

0

542

April 10th, 2023 21:00

Scratching noises in my Dell Inspiron 3501

Hi there!

I have a Dell Inspiron 3501 (purchased on June 2021). I've noticed recently that it is making short scratching noises (as if two metals come into physical contact with one another). And my guess, after reading through countless blog posts and forums is that there must be something wrong with my hard drive. I intend to disassemble my machine and do a thorough cleanup when I get the time. What I would like to know is that should I be concerned?

- The noise is quite loud.

- Occurs very occasionally, like once/twice a day (8 - 10 hours of operation).

- I do not notice any type of slowdown in my machine (everything works as usual).

- No issues with POST whatsoever.


This has started a few weeks ago, but I ignored it thinking it is coming from my cooling pad fans. Now that have heard this noise when I'm using my laptop at work, w/o cooling pad, I'm a little concerned.

I've run the CrystalDiskInfo and HDDScan utilities and the only issue both of them displayed is that a reallocation sector count of 100, where the threshold is 50 and a "Caution" remark from CrystalDiskInfo. A quick lookup on google says I might need a replacement. (I have admittedly done some heavy installs and re-installs of VisualStudio, Intel oneAPI probably a 100 times and guessing whether this might have caused the wear?).

 

System info:

Device name Inspiron-3501
Processor 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz 2.42 GHz
Installed RAM 16.0 GB (15.7 GB usable)

Hard drive: TOSHIBA MQ04ABF100 1000.2 GB

I'm annexing the results from CrystalDiskInfo and HDDScan.

I'd appreciate any help regarding this. Thank you.

Screenshot (20).png

  • AdrianG001

    6 Operator

    •

    3957 Posts

    309

    0

    Posted April 10th, 2023 23:00

    Please run the hardware diagnostics to check if the hardware is working as designed, you can release static power and run hardware diagnostics in the system. Follow the steps below.

    Switch off the system; remove the battery, ac adapter and the power cable. Press and hold down the power button for thirty seconds to drain any excess static power and run the test. Restart the computer and at the Dell logo screen, start tapping the F12 key a few times until you see the ‘One Time Boot Menu’ appear.

    At the one time boot menu, press the down arrow key to highlight ‘Diagnostic’, and then press Enter to begin the hardware diagnostics.

    If the test fails, please make a note of any error codes listed. You can also refer to the link below. 

    http://dell.to/OUGnqT

     Let us know about the progress.

  • Anoban

    12 Posts

    299

    0

    Posted April 11th, 2023 04:00

    Hey thank you for the help. Here's the result of the "Advanced test". 

    20230411_171835.jpg

     

  • ejn63

    12 Elder

    •

    31847 Posts

    •

    156271 Points

    301

    0

    Posted April 11th, 2023 04:00

    Keep backups current -- it could be a sign of impending drive failure, particularly if the noises are new.  If yo you want to both eliminate the noise and vastly speed up the system, replace the drive with a solid state drive.

     

  • ejn63

    12 Elder

    •

    31847 Posts

    •

    156271 Points

    296

    0

    Posted April 11th, 2023 05:00

    That means the drive has crossed the error threshold -- it needs to be replaced.  Consider replacing it with a solid state drive, which will operate silently.

     

  • Anoban

    12 Posts

    287

    0

    Posted April 11th, 2023 07:00

    Thank you. I certainly am considering a NVMe. Appreciate all your help. In the meantime, can anyone provide any insights on how this might have happened? My machine is not that old (barely 2 years). I did install & reinstall huge software suites many times, besides I use dism and Windows defender very frequently (almost daily).. I have never dropped my laptop and the hard drive had never gone through any sort of mechanical impacts. I've reinstall Windows only 3 times. If there are anything wrong on my side please point out, so I can be more careful with my SSD. 

     

    Thank you.

  • ejn63

    12 Elder

    •

    31847 Posts

    •

    156271 Points

    278

    0

    Posted April 11th, 2023 07:00

    There's no way to know.  Hard drives are easily the least reliable component of any in the system due to their mechanical tolerances.  And the price pressures on hard drives and the shrinking market for them mean that manufacturers are not investing in engineering and quality control -- it's a dying market that means mechanical hard drives will likely be gone from new systems before too long (they are in fact gone from all but the most basic, entry level notebooks like the one you've posted about).