UNSOLVED

Chris Richards

updated

7 years ago

0

29772

April 1st, 2014 06:00

Server freeze When seeing no disk I/O and 100% highet active time

We are running Server 2012 Hyper-V with 5 hosts and about 70 VM's Following the firmware upgrade on the equallogic to version 6 we started to see performance issues with the VM's The server would freeze anyone using the applications running on the server would report them as hanging. In resource monitor on the VM under Disk when the freeze occurs the Disk I/O Drops to 0 and the Highest Active Time jumps to 100% The queue length for a couple of the disks jumps to 1 and this could last for about 1 minute. It looks like the Iscsi for the VM can not read from SAN. This can affect several VM's at the same time but on different host's. The hosts don't show anything. We have been trying to Identify the cause but so far we have not been able to find anything or a solution to the problem. Has anyone seen this type of issue before or have any suggestions?
  • 1518

    0

    Posted April 1st, 2014 08:00

    Hi Don

    We have had calls logged with Dell regarding the issue but so far they have not been able to track down the issue.  

    We have updated network card drivers, Bios on the blade servers.  The HIT pack.  So far nothing has gotten to the bottom of the issue. I've logged the issue here to see if anyone has seen the issue we have before.  This issue seems to be beating everyone.

  • ICEjake

    1 Message

    1077

    0

    Posted February 12th, 2020 17:00

    @Chris Richards Any chance you were able to find a resolution to this issue? I'm currently banging my head against an old EqualLogic showing identical symptoms to what you've described. We've tried following a number of recommendations including disabling VMQ, TCP Offloads, but have not found a resolution. I realise this is a total shot in the dark as this thread is nearly 6 years old....

  • bealdrid2

    1 Rookie

    •

    117 Posts

    1058

    0

    Posted February 13th, 2020 08:00

    Just out of curiosity, what model EQL array(s) do you have?

  • dwilliam62

    6 Operator

    •

    1516 Posts

    •

    6374 Points

    1048

    0

    Posted February 13th, 2020 10:00

    Hello, 

     Also in addition to what models, what firmware are they running?    What server OS's are connecting? 

    Do you have SANHQ installed? 

     Don