We have purchased a new CX4120 which is planned to replace our current CX320, is there an easy way to migrate the LUNS from one Clariion to another.
You will have to excuse my ignorance on this, as i'm not attending the Training course until next month, but the data needs to be moved over by the end of this month.
you have a couple of options. Array based tools would be SanCopy or MirrorView. Do you know if you have those features ? Another option is host based tools: PowerPath migrator (have to be on recent version of PowerPath). PowerPath migrator license is free, can be obtained from your EMC TC.
Depends on what you have connected. EMC recommends using the SAN Copy or MirrorView, but you need to acquire licenses. Mirroring volumes would be a good option, but depends on the operating system. One Volume mounted on the CX3-20 and another mirrored operating system on the CX4-120 (Such HP-UX MirrordiskUX, AIX Mirror, etc). Tools such as EMC Replistor or similar may be good options.
We recently completed a successful CX3-20c to CX4-240 migration (8 shelves of disks, mostly 300GB) and used a combo of SAN copy and host based migration. Our preferred method was host-based whereby we zoned the host to the new SAN and created an equivalent LUN for it then used host tools (for example Storage VMotion for our ESX hosts) to migrate data from the old LUN to the new LUN - we were just more comfortable with the control we had this way rather than using SAN copy. We did use SAN copy for some tricky stuff though where host tools wouldn't really work. It took several months to complete the migration but we were being cautious and prioritising uptime over migration speed.
Another option is the in place migration, where only the SP's are replaced and the shelves with disks remain where they are. No single byte has to be copied over the SAN to the new Clariion for that, since the old Clariion will become the new one
dynamox
11 Legend
•
20419 Posts
•
87439 Points
608
0
Posted January 11th, 2010 06:00