I'm new to Clariion and bought CX700 with 2 x DAE2 from ebay to learn. It does not have any Flare OS. I have 5 x 146 FC HDD in one DAE and 15 x 146 in 2nd DAE.
I need to install the Flare release 26 on Ist DAE, I already have Flare code
I Have a Windows server 2003 with powerpath connected to CX. i need a procedure how to install flare first time when there is no OS on the HDD.
You appreciate everone hlep who answer the question
There is no customer procedure for load flare on the vault drive , you need to contact an authorize service provider or EMC customer support .
FLARE is a property of EMC and is loaded in a factory with a special procedure and software not available in the field .
The package you have is just a part of the entire flare environment , we use special hidden partition on the first 5 drive for different purpose and this can't be created in the field from scratch .
We have procedure in the field to rebuild this space if they got corrupted but in this case clariion itself already contain a good copy in a particular area where it can be use for reimaging the sp .
The method is a service only procedure - you should probably contact EMC - the first five disks in the first enclosure are the FLARE drives and contain the Flare OS - if they are blank, it will require EMC to install.
For other information about using the array and connecting hosts, there is a lot of documentation available on PowerLink - to start go to:
Home > Support > Technical Documentation and Advisories > Hardware/Platforms Documentation > CLARiiON CX Series Systems
Open the CX700 section
For connecting hosts, go to:
Home > Support > Technical Documentation and Advisories > Host Connectivity/HBAs > Installation/Configuration
For general information about configuring for Best Practices see the following:
EMC CLARiiON Best Practices for Fibre Channel Storage: FLARE Release 26 Firmware Update - Best Practices Planning
you can not upload flarecode if do not have first 5 disks, because there have utility partitions for recovery flare OS.. you have to help some one who has flare image within some disks(al least 1 or more disks).. you do better contact EMC or Service-VAR..
Good luck getting a storage array bought off of eBay working
If you bought a non-operational CLARiiON off eBay then you really have no choice but to get EMC to get it working again. Unless you can find someone selling Cx700 vault drives as well.
chiodp
149 Posts
567
1
Posted May 7th, 2009 09:00
FLARE is a property of EMC and is loaded in a factory with a special procedure and software not available in the field .
The package you have is just a part of the entire flare environment , we use special hidden partition on the first 5 drive for different purpose and this can't be created in the field from scratch .
We have procedure in the field to rebuild this space if they got corrupted but in this case clariion itself already contain a good copy in a particular area where it can be use for reimaging the sp .
Regards
Pierluca