Sorry for being an idiot.. i am new to Centera dev and trying for first time to connect to the public cluster(s). XP client VS2005 in debug mode.. downloaded SDK and wrapper and compiled wrapper and referenced FPSDK.DLL etc..no errors in solution/project. downloaded pea files as applicable.
When I execute the following code(using name/secret authentication):
Unfortunately that didn't do it..same error I got the PEA file yesterday and the last refresh of the cluster was 11/5/2009 and the refresh interval is published as 2 months so should still be valid..
one thing i did notice is that the pea file appears to have unix CR/LF so when i opened in notepad it was all on one line and I had to use wordpad to open to get it to recognize the CR/LF and wrap(as pasted above).. could that be it?
I am able to connect OK, so it is probably just now so that is probably the problem. You need to speak with your network administrator to check if the port is open for both TCP and UDP.
gstuartemc
2 Intern
•
417 Posts
293
0
Posted December 16th, 2009 08:00
Using a PEA file is the recommended Best Practice. Try "escaping" the slashes i.e. use \\
Also, make sure that you are using an up to date PEA file for the public cluster that you are attempting to use.