UNSOLVED

abalcazar1

updated

16 years ago

0

1383

March 8th, 2011 10:00

NFS share problem with mac os x client. When I try to copy or write any file in this NFS send me error message "the operation cannot be completed because you do not have sufficient privileges"

NFS share problem with mac os x client. When I try to copy or write any file in this NFS send me error message "the operation cannot be completed because you do not have sufficient privileges"

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    741

    0

    Posted March 8th, 2011 10:00

    do you have read/write access to write to that NFS share ?

  • 741

    0

    Posted March 8th, 2011 11:00

    yes, this NFS share I create with all full access.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    741

    0

    Posted March 8th, 2011 12:00

    so your mac os x ip address is listed under root, access and read-write sections in NFS export properties ?

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    741

    0

    Posted March 8th, 2011 15:00

    From that client ssh into the Celerra control station or any other Unix client and do a “who” – the last output colum will tell you which IP address you are really coming from

    Compare that to what you see when you do a “/usr/sbin/showmount –e ”

    If that is correct next look at the directory permissions where you want to write into

    I am assuming you are using default NATIVE access policy without any special params on the Celerra

    Rainer

  • 741

    0

    Posted March 8th, 2011 15:00

    Yes, if it was configured ip address in this section NFS export properties.

    Only one situation I used DHCP in enviroment mac.

  • 741

    0

    Posted March 8th, 2011 15:00

    Yes, if it was default NATIVE access policy and don´t no configuration any special params on the Celerra.

    What it is your recommendation in this case?

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    741

    0

    Posted March 8th, 2011 16:00

    Classic troubleshooting using the CLI

    There are two levels that determine whether can write to a NFS share

    First is the export options on the server – for testing you can open them up to a complete subnet

    Second the directory permissions – for testing you can just create a test dir with rwx for ugo

    Sure – sometimes there are bugs on the client or server but with NFS access problems 99% of the time the problem is in front of the computer and not inside

    Rainer