UNSOLVED

sidanat

updated

16 years ago

S

sidanat

51 Posts

0

1167

January 15th, 2011 08:00

32bit celerra simulator

Hi

is there a 32bit version on the celerra simlulator? i am trying to run it in VMWare workstation on a 32 bit CPU laptop

  • sebbyr

    99 Posts

    275

    1

    Posted January 15th, 2011 08:00

    In Powerlink, you can do a search in the upper left hand corner for Celerra Simulator.  There may be a link there to a previous version.  Otherwise, follow this path in Powerlkink for the 6.0 version:  Home > Support > Product and Diagnostic Tools > Celerra Tools > Celerra Simulator 

    Sebby Robles

    EMC Celerra Support

  • christopher_ime

    6 Operator

    •

    1962 Posts

    275

    0

    Posted February 1st, 2011 22:00

    The Celerra Simulator that has been available from PowerLink since September 2010 is running DART 6.  One of the changes with DART 6 has been the move to a 64-bit architecture which, of course, includes the VSA.  Therefore, as you know, you will need a 64-bit processor to run it.

    If you only have a 32-bit environment, then you would can run the previous generation simulator which is not archived on PowerLink.  However, you can still download the UBER edition of 5.6.  In case you are not familiar with it, this was created by one of the EMC vSpecialists and is derived from the original/official VSA.  As you'll read in his blog, this UBER edition was tweaked to be "Smaller, Faster, Easier, Geekier" (in the author's own words).

    You can still obtain the v5.6.48 version from here (v2):

    http://nickapedia.com/2010/05/19/besser-uber-celerra-vsa-uber-v2/

    Read this post for some background about it and the benefits running this over the original/official version (but make sure to obtain the copy from the link above):

    http://nickapedia.com/2010/05/01/celerra-vsa-uber-smaller-faster-easier-geekier/