UNSOLVED

Raghuram Bhat G

updated

13 years ago

0

2027

November 28th, 2013 21:00

com.avamar.asn.NetworkException: Unable to connect to a login server

Hi,

I have recently configured a fully NAT'd Avamar 6.1 environment. All the Firewall ports has been open

My issue is with the Avamar Administrator Java GUI, which we install on the clients Admin systems to allow them to log in and monitor

I keep getting "com.avamar.asn.NetworkException: Unable to connect to a login server"; I can ping any Avamar Server Utility node without issue and I could telnet port 7778 (all ports are allowed in the firewall)

Anyone experience this? Any suggestions?

  • Leo Li

    4 Apprentice

    •

    9030 Posts

    1002

    0

    Posted December 1st, 2013 16:00

    Hey,

    Please check again and ensure that the case of the hostname for the utility node matches in all of the following locations:

    1. DNS
    2. /etc/hosts
    3. /etc/sysconfig/network

    After the checking, if the problem still appeared, please try following method:

    1. Try to change the rmi_address in the mcserver.xml and add the manager ip address to rmi_address.

    2. Restart the mcs

    3. Start the sched


    Hope this helps.

  • 1002

    0

    Posted December 1st, 2013 20:00

    Hi Leo Li,

    Thank you for the response.

    However in our scenario we will be having more than 1 Avamar Administrator Manager I how can we enter one IP Address??

    Also which IP Address I need to enter in mcserver.xml in the filed "rmi_address" value. Whether the Public (NAT) IP or??

  • Leo Li

    4 Apprentice

    •

    9030 Posts

    1002

    0

    Posted December 1st, 2013 20:00

    Hey,

    I have not encountered this situation before. I suggest you to try to input the few IP address respectively. Please try.