UNSOLVED

AzJazz

updated

3 years ago

A

AzJazz

1 Rookie

•

22 Posts

1

2172

December 5th, 2021 22:00

AW3821DW, add a "White" color to the AlienFX Lighting

Please add a "white" color option for the AlienFX Lighting on the AW3821DW.

  1. I was pretty surprised the most basic color (beyond black) wasn't already available and built-in to the AW3821DW firmware
  2. I use the "Downlight" LEDs under the screen to illuminate documents when I am working in the dark and don't want to wake up the spouse. None of the installed colors can be used for this
  3. And before you suggest it: NO, I do not want to install the three Dell Alienware applications required to just get the white downlights. I installed those applications as a test, and they made my GPU run about 10 degC hotter when my system was sitting idle. A White lighting color option should have been installed from Day #1

Thanks,

AzJazz

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    1409

    0

    Posted December 8th, 2021 17:00

    Hi There,

    We have an update from the back end team that to get the white all the 3 presets RGB must be set to the maximum. Dell is not going to create a firmware update to change the black Lighting Zone color option to white. You should be using the single app, AWCC (Alienware Command Center) as shown on the AW3821DW drivers page.

     

    Regards,

    Paventhan M


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • AzJazz

    1 Rookie

    •

    22 Posts

    1389

    0

    Posted December 8th, 2021 23:00

    Hi, Paventhan -

    As you can see in my comment #3 above, I specifically stated that I DO NOT want to - and, absolutely shouldn't need to - install the three Dell Alienware Windows applications required just to get the most basic color option of "white" for the built-in firmware AlienFX lighting options. The "3 preset RGB" values the backend team mentions are in the AlienFX Command Center / AlienFX Lighting Windows applications, not the options available from the monitor menu selections. I can't and won't install those three applications. They cause my CPU to run 10 DegC hotter, even when my system is idle.

    Realistically, a "white" color option should have should have been built into the monitor in the first place. In fact, there is already a spot available ready for use in the monitor firmware for the "white" color selection: If you look at the first AlienFX Lighting Zone color option on the monitor menu, there is a "Black" color available. Why is "Black" even an available color selection? Why are they wasting a limited color menu option by putting in "Black"? If I was going to set a Zone to "black", the way I would do it is to turn that Zone "Off". Maybe you can explain to me the difference between the "Black" color option and the "Zone Off" option, but they sure sound the same to me.

    That "Black" Lighting Zone color option should be easily replaceable with a "White" option, if you asked me.

    Thanks,

    AzJazz

  • 1138

    0

    Posted April 18th, 2022 13:00

    I agree on that... Got soo much trouble with the alienware fx software, (I learn also that microsoft store discontinued the alienware FX stuff to control rgb) Iam unable to get it work to use the white color illumination on my AW2721D. Also there is no white color option in the monitor control panel itself which is ridiculous, such an expensive monitor missing white color option its not real for me...

  • 1136

    0

    Posted April 18th, 2022 13:00

    The most I can go to... This "application" is missing from microsoft store... I can`t see it in my account app library.

    Screenshot 2022-04-18 234645.png

  • AzJazz

    1 Rookie

    •

    22 Posts

    1118

    0

    Posted April 19th, 2022 07:00

    I still find this very frustrating - Dell created a bad design on an extremely expensive monitor, and they refuse to fix it - even though it is totally possible and relatively easy. As mentioned above, there is already an available wasted color location ("black") that can be replaced with white.

    Changing the slot's color from black to white is as simple as changing 3 constants (or possibly one) in their existing code from Red, Green, Blue = 0,0,0 to 255,255, 255.

    There could be a few other minor changes to have everything consistent on the On-Screen Menus, but this change is so incredibly tiny, I am really disappointed in Dell's lack of support for this problem.

  • Echo9G

    2 Posts

    0

    0

    Posted October 29th, 2023 22:36

    @DELL-Cares​ What does that mean exactly?  I do have AWCC and cannot seem to get my AW3821DW to display just white on the LED pointing down on the desk.