
Solved!
Go to SolutionClosed
G
GiftMeABreak
1 Rookie
•
7 Posts
0
7984
January 1st, 2023 20:00
Aurora R15, Kingston Fury Beast DDR5 6,000MT/s compatible?
I'd like to increase the RAM in my Aurora R15, which came with one 16 gig stick of 5200MT/s. Would the R15 notice any difference if I added the faster stuff? Kingston has up to 6,000MT/s available, but I don't know if the mobo and/or BIOS would be able to use the extra speed.
Responses (49)
Solutions (0)
GiftMeABreak
1 Rookie
•
7 Posts
2492
0
Posted January 2nd, 2023 03:00
Yipes! 7k is moving right along! Thanks for the info.
Real_Boy85
2 Intern
•
203 Posts
2493
2
Posted January 2nd, 2023 03:00
CORSAIR DOMINATOR PLATINUM RGB DDR5 7000Mhz
Iain K Mackay
2 Intern
•
176 Posts
2404
1
Posted January 4th, 2023 02:00
Been discussed on here frequently. The high end Alienware desktop range is very picky when it comes to upgrading memory. Dell will immediately point to the R15 spec sheet hidden 5 pages down if it does not work. There also good at unusual memory speeds.
Do your research because you do not have a standard motherboard and it was built to house the system you have with little or no upgradability offered.
GiftMeABreak
1 Rookie
•
7 Posts
2300
0
Posted January 8th, 2023 10:00
I ordered some Beast DDR5 XMP Desktop Memory 5600MT/s and will post what I get for speed after I install it and read what it says in the BIOS. I am expecting 6,000.



aryuss
1 Rookie
•
77 Posts
881
1
Posted April 19th, 2023 01:00
Once you have the RAM installed, remove the button battery from your motherboard. Wait like 10 seconds , then put it back in. Flash your BIOS back to 1.0.5. Open AWCC, click on FUSION, scroll to the left and click on the ADVANCED VIEW tab next to MEMORY CLOCK and choose RAM 1. Reboot and done.