UNSOLVED

Sabster76

updated

4 years ago

Closed

S

Sabster76

1 Rookie

•

45 Posts

0

588

April 30th, 2023 12:00

Aurora R13, issues (of course after warranty is up)

My system looked like it was on (LED's up - but monitor was off) and when I clicked the mouse to wake it up, I got some blink codes (looks like it has to do with the power supply) - 3 amber, 5 white.

As I said, it literally started after the warranty expired. A friend of mine ran into the same problem on his Dell board, different model however.

Anyone have experience with this or better yet, have a quick fix? I'm assuming if it's a PSU issue, it's something with Windows more than the system, as if I turn off the power (hold in the power button for 30 seconds), after I restart it resumes where it was (not a fresh reboot). I do reboot my system daily btw.

  • Sabster76

    1 Rookie

    •

    45 Posts

    294

    0

    Posted April 30th, 2023 13:00

    No errors when I did the diagnostic - I'll check out the BIST (I honestly don't know if it does or not).   I have been wanting to get the upgraded PSU (the 1000w), but I'm not completely sure Dell is really selling them like they claim (they've never been on the R13 "parts" page...) and the sales guys always do the same thing:  "we're currently sold out of them..."

     

    Thanks for your reply.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    296

    0

    Posted April 30th, 2023 13:00

    3,5 Power Rail Failure: EC ran into power sequencing failure

     

    Run an Epsa test, see if any failures come back: ePSA test 

    If your PSU has a BIST option, use the BIST to see if it comes back healthy: BIST 

     

    Also, since you are using hibernation instead of a full shutdown, you can try disabling hibernation.

     

  • ProfessorW00d

    6 Operator

    •

    2373 Posts

    •

    10247 Points

    291

    0

    Posted April 30th, 2023 14:00

    I'm not sure of your reason for upgrading PSU . . . but if you are going up, consider going to 1350 watt PSU.

  • Sabster76

    1 Rookie

    •

    45 Posts

    257

    0

    Posted May 1st, 2023 14:00


    @ProfessorW00d wrote:

    I'm not sure of your reason for upgrading PSU . . . but if you are going up, consider going to 1350 watt PSU.


    They don't make a 1350 for the R13 - the biggest they had was the new 1000w

  • ProfessorW00d

    6 Operator

    •

    2373 Posts

    •

    10247 Points

    252

    0

    Posted May 1st, 2023 15:00

    Correct, you would need to get a 1350 watt PSU made for the Aurora R15 and . . . make it work in the R13.

    read down the thread 

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    248

    0

    Posted May 1st, 2023 16:00

    Try running it without System Sleep or Hibernation for a while. However, the spinning HDD and Monitor can still sleep/power-down.

    Laptops, Tablets and portable things need to Sleep. Desktops ... not really. Just Shut-it-Down before you go to bed at night.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Jupiter_7

    1 Rookie

    •

    107 Posts

    186

    0

    Posted May 3rd, 2023 15:00

    Also in the settings make sure you have "turn on fast startup" set to unchecked (off).  This setting is hidden in ControlPanel-HardwareAndSound-PowerOptions-SystemSettings.  

    Why would you want the 1000watt powersupply?  Due to its split-rail design it does not put out enough watts for a 4090.  If you go 4080 or lower, the current 750watt supply is fine.    

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    185

    0

    Posted May 3rd, 2023 15:00

    Have to love split rail designs. This is why I always go for a single 12 volt rail. Provided way better upgrade options than a split rail does.