UNSOLVED

BDL99

updated

6 years ago

Closed

B

BDL99

1 Rookie

•

14 Posts

4

81810

March 23rd, 2021 12:00

XPS 13 9310, overheating

I bought this Dell XPS 13 9310 last December. The first one died on delivery so a replacement was sent.  This one began working fine and I now have it loaded with Photoshop and my other apps. Core i7, 16GB and 1TB SSD.

The problem is it randomly overheats and freezes. When I touch it the underside is boiling hot. It sits on my wood desktop like my other laptops did for years without trouble. I've turned Thermal Management to Cool to no avail.

For the thousands I've invested, this is by far the most troublesome laptop I've ever had.

Are there any solutions? (I have read others experience the same).

  • 37196

    0

    Posted March 24th, 2021 04:00

    @BDL99 - I would suggest running the 'Dell Update' Application (factory installed). This application will automatically updates critical fixes and important device drivers as they become available on the Dell website. Link from Dell's XPS9310 support site.

    Another driver to consider installing from Dell's support site is the 'Intel Dynamic Tuning Driver'
    https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=td4n2&oscode=wt64a&productcode=xps-13-9310-laptop
     
    Release Notes: The Intel Dynamic Tuning is a power and thermal management solution that is used to resolve fan noise, overheating, and performance-related issues of the system.
  • hombre2usa

    1 Rookie

    •

    18 Posts

    37092

    2

    Posted March 28th, 2021 08:00

    Same issue here.  I have the exact same laptop you have.  Yes, it gets boiling hot that is for sure.  This is what I did.

    1. Go to BIOS and turn off OS Recovery and SupportAssist

    2. Uninstall any app that mentions SupportAssist including plug-ins. See complete instructions here.

    By doing the above, that should get rid of your issue.

    Now, be careful when Dell sends you notifications to UPDATE. Don't just click "yes," instead check what is being updated and make sure you are not "reinstalling" SupportAssist.

    Conduct monthly BIOS checks to make sure both features mentioned in #1 are OFF.

    This could resolve your issue.  

    Now, there were other posts about disabling Hibernate and Modern Standby that I am still evaluating, follow up on those posts as well, and determine if additional action is necessary.

    Keep us posted with your progress.  Good Luck! 

  • BDL99

    1 Rookie

    •

    14 Posts

    37083

    2

    Posted March 28th, 2021 09:00

    thanks. I will look at disabling Support Assist items.

    So far, Dell support has me disabling all non-Microsoft services and the machine has not frozen or gotten hot since (couple days now). So it is obviously a service.

    I'll start re-enabling them one at a time giving consideration to Support Assist as per your remarks and see if I can detect the culprit

     

     

  • Liamtmt7

    2 Posts

    37058

    1

    Posted March 28th, 2021 11:00

    Having the exact same issue. Machine is 1 week old and has crashed twice. Today whilst charging it has become too hot too touch and currently won't power on. So disappointed for such an expensive product 

  • DELL-Cares

    Moderator

    •

    27852 Posts

    •

    772 Points

    37057

    1

    Posted March 28th, 2021 11:00

    Please private message ( click our username) us and share the XPS 13 9310 Service tag or Express Service code so that we can assist you further.. You can find it at the back of your laptop.

    Settings all should use

    Set DPM (Dell Power Manager) to Quiet Mode
    * Open the Dell Power Manager software
    * Go to Thermal Management
    * Select Quiet

    Disable Windows Search Index and Protocol if seen
    * Click the Windows icon, type Services, click Services app
    * Search for Windows Search
    * Right click Windows Search
    * Click Stop
    * Right click Windows Search
    * Click Properties
    * Change Startup type to Disabled
    * Click Apply- OK
    * Close the Service app

    Workarounds for TESTING only. Do not leave them in this state AFTER testing!

    Disable Intel TurboBoost in the BIOS (may not be an option in newer BIOS)
    * Plug the external power adapter into the XPS 13 9310
    * Restart
    * Tap F2
    * Open Performance
    * Click Intel TurboBoost
    * Uncheck, Enable Intel TurboBoost
    * Click Apply- Exit
    * Retest

    Disable "Allow fingerprint reader to sleep" in the Device Manager
    * Press Windows Key + X and choose Device Manager from the list
    * When Device Manager opens, locate your fingerprint reader. It could be located in Biometric Devices section
    * Right click the fingerprint reader and choose Properties
    * Navigate to the Power Management tab and uncheck "Allow the computer to turn off this device to save power"
    * Click OK to save changes


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • BDL99

    1 Rookie

    •

    14 Posts

    17154

    0

    Posted March 28th, 2021 13:00

    You have to wait for it to cool down before powering up again.

    DELL-Cares has been very helpful so far with multiple suggestions I am working through to locate the problem. One was to turn off Turbo Boost in the BIOS. I did that and its cooled down but still freezes. I also disabled all non-Microsoft services and restarting one at time to hopefully locate problem.



  • xiaomei

    1 Rookie

    •

    186 Posts

    13998

    0

    Posted March 28th, 2021 19:00

    1. Open [360 Security Guard]-[Functions]-[Hardware Master]-[Temperature Monitoring], check the temperature, if there is a red display, or 360 Hardware Master will sound an alarm, suggesting to check the heat dissipation of the machine.

    2. The high temperature of the computer is generally caused by poor heat dissipation inside the machine. It is recommended to find a professional physical repair shop to remove dust and add thermal grease. Users who have no experience in disassembling are advised to operate with caution to prevent hardware damage caused by improper operation and thus unnecessary economic losses to you. If it is within the warranty period of the notebook, it is recommended to go to the local after-sales center for maintenance, otherwise the future warranty service may be affected after the disassembly.

    3. The hardware is damaged. If the above method does not work, it is recommended to reinstall the operating system for testing. If the temperature is normal and the operating system has been newly installed, the problem persists. The automatic shutdown and restart may be caused by the hardware. The power supply is faulty and the power supply is insufficient. Frequent restarts and shutdowns or the motherboard capacitors are caused by problems. It is recommended to go to the hardware repair station. Test replacement.

  • Liamtmt7

    2 Posts

    15019

    2

    Posted March 31st, 2021 06:00

    Hope you get your issues resolved. I have given up and returned the product for refund.

  • BDL99

    1 Rookie

    •

    14 Posts

    14847

    0

    Posted March 31st, 2021 07:00

    I understand. I am getting frustrated myself. Its been 3 months of daily failures with little hope to date of Dell actually resolving anything.

  • BBdancer123

    1 Rookie

    •

    7 Posts

    6154

    3

    Posted April 1st, 2021 12:00

    Same problem...same configuration. Spent 2 days on phone with Dell 2 different technicians.  Both told me to unplug charger when it is 100% charged -- which I never had to do with any other laptop -- and to be sure updates are installed both Win 10 and Dell via the Dell Update Manager (vs. the Support Assist).  Tech guy last night installed about 10 drivers.  Totally frustrating given all the great reviews I've read about this laptop and the expense.