
UNSOLVED
Closed
C
canneverbeeasy
1 Rookie
•
6 Posts
0
3008
May 2nd, 2022 12:00
XPS 8940, G.Skill Ripjaw V ram upgrade
XPS 8940 with 2x16gb ram from Dell. Motherboard is ok3cm7.
I want to upgrade the ram to at least 2x32gb and most likely will go to 128 total. Has anyone has any luck installing G.Skill Ripjaw V (F4-3200C16Q-128GVK)? I don't see Dell even as an option for the compatibility checker for the motherboard on G.Skill website.
The G.Skill is (4x32GB) 288-Pin PC RAM DDR4 3200 (PC4 25600)
I checked the Crucial website and it recommended Crucial Ballistix 32GB DDR4-3600 (BL32G36C16U4B). It was showing unavailable, but it would also be a couple hundred more than the G.Skill.
I understand the ram speed will be limited due to the i7 11700, but just need to increase my RAM considerably.
Thanks for any help or suggestions.
Responses (16)
Solutions (0)
XMP memory is not supported on most Dell PCs (it will run in JEDEC mode if compatible),
best practices is to use non-XMP (even though CL will be a bit worse), standard JEDEC 2666/2933 bins at 1.2V, non-ECC, Unbuffered/Non-Registered, from the same reputable supplier/batch to ensure compatibility between sticks in other slots, right resulting frequency and true Dual mode (although with i7-11700 it will be anyways running in Gear2 mode {as per Intel specs} or CR=2T mode but at lower frequency and better latency). Perhaps even worth taking a look at single-rank 1Rx8 if those are still in stock (manufacturers are switching to x16 chips those days)
as per JEDEC standards:
DDR4-2666T : CL17
DDR4-2666U : CL18
DDR4-2666V : CL19
DDR4-2666W : CL20
DDR4-2933V : CL19
DDR4-2933W : CL20
DDR4-2933Y : CL21
DDR4-2933AA: CL22@canneverbeeasy The SPD Speed of the F4-3200C16Q-128GVK memory according to the G.Skill specifications is 2666 MHz so you will be limited by that speed even though with an i7 CPU you could run memory at 2933 MHz.
I could not check the Crucial website; apparently, there is an error (page not found) now when I search for XPS 8940 memory. Was Crucial Ballistix the only recommendation? What about this: https://www.newegg.com/crucial-64gb-288-pin-ddr4-sdram/p/N82E16820156238
canneverbeeasy
1 Rookie
•
6 Posts
1266
0
Posted May 2nd, 2022 18:00
That is actually one that came it, it was just on page 5/5 and I didn't see it. I may go ahead and try this one out that you linked. Thanks
@canneverbeeasy I wish the crucial.com compatibility tool was working so you could check the compatibility of that memory before purchasing.
canneverbeeasy
1 Rookie
•
6 Posts
1248
0
Posted May 3rd, 2022 08:00
I used the Crucial Scan tool and that model was listed. The Ballistic models represented the first several pages of "Compatible Memory for XPS 8940", the one you listed was towards the end of the 5th page of suggested products.
Just curious,
"XPS 8940 with 2x16gb ram from Dell. Motherboard is ok3cm7"
The FAQ for the 8940 does NOT list that motherboard?
===================
Motherboards =
KV3RP Foxconn 02012PQ00-600-G, Released July 9, 2020
2W4W1 Foxconn 02012TA00-600-G, Released December 1, 2020, Brazil only
F1H92 Foxconn 02012YJ00-600-G, Released March 15, 2021, Brazil only
427JK Foxconn 02012VY00-600-G, Released March 15, 2021
K3CM7 Foxconn ??, Released July 14, 2021================
I originally had the first one, had a problem and was replaced by the latest at the time, 427JK.
This list was updated about 4 months ago. It would seem you have a newer Motherboard. When did you get the 8940 if I may ask? Recently?
I'm have machine lockups, and it appears it is BIOS related, or h/w (no, Windows doesn't capture any errors) and only happens to those with Nvidia cards as well... on BIOS 2.4.0 and 2.5.1.
What BIOS version are you on might I also ask?

canneverbeeasy
1 Rookie
•
6 Posts
996
0
Posted May 3rd, 2022 10:00
Got it this previous December at Costco. According to Intel Extreme Tuning Utility, Mobo is 0k3CM7 version A00 and BIOS version 2.0.13
canneverbeeasy
1 Rookie
•
6 Posts
1240
0
Posted May 3rd, 2022 10:00
I can't find anything about the SPD speed for the Crucial one you linked. I see on the newegg site that it can "3200MT/s RAM can downclock to 2933MT/s or 2666MT/s if system specification only supports 2933MT/s or 2666MT/s". Does this mean that it should run at 2933MHz for my computer?
@canneverbeeasy wrote:
Got it this previous December at Costco. According to Intel Extreme Tuning Utility, Mobo is 0k3CM7 version A00 and BIOS version 2.0.13
Very interesting? I got mine in Aug. of 2021, so you should have the same motherboard I have, 427JK, but you are way back in BIOS version?
Could you have gotten 'old stock'? It is an 8940, right?
Also it seems Googling that motherboard it appears to be the same as I have, more than one number assigned to it? Saw that in eBay, so that might not be anything important?
BIOS being so old might be a factor in your problem? I don't really know, but I'd try BIOS V2,3 at least. However, any version above V2.2 limits you to going back any further.
Oh, the Intel Extreme Tuning Utility was not on my i7-11700 XPS SE and I installed it and it can't run.
I do have Memory Integrity on, I guess you do not? If you RUN SYSINFO, it will also show you the motherboard and BIOS... might show different numbers?


DELL-Cares
Moderator
•
27843 Posts
•
745 Points
1295
0
Posted May 2nd, 2022 12:00
Thank you! We have received the required details. We will work towards a resolution. In the meantime, you may also receive assistance or suggestions from the community members.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice