UNSOLVED

easygoer72

updated

7 years ago

0

2483

May 15th, 2020 14:00

XPS 8900, Windows 10 Recovery, watchdog error

Hello,

My SSD recently went bad on my 2015 XPS 8900 desktop. I have a new drive in there and I downloaded the Dell OS Recovery Tool.  I created the USB boot drive using the Recovery Tool on another machine I have, then I've been attempted to boot my XPS to that USB so I can reinstall Windows 10.  However, I'm having problems getting it to boot.  After I hit F12 during the Dell splash screen, I then choose the UEFI USB boot option. It then reboots, goes back to the Dell splash screen, then gives me a BSOD with a Stop Code of DRIVER PNP WATCHDOG.  Any ideas that can get me past this in order to reinstall Win10 would be very appreciated.

 

Thanks!

  • Vic384

    6 Operator

    •

    3161 Posts

    1755

    0

    Posted May 15th, 2020 14:00

    Since you are reinstalling Windows 10 you could use Microsoft's Media Creation Tool to create a bootable USB to install Windows or you could use the Media Creation Tool to download the Windows 10 ISO and create a bootable USB drive using a program called Rufus. See this: https://www.windowscentral.com/how-create-windows-10-usb-bootable-media-uefi-support

    It has been reported that some tools used to create a bootable USB do not work but Rufus does work.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1740

    0

    Posted May 15th, 2020 15:00

    @easygoer72  -  Always include exact PC model in your posts...

    Do you have another drive installed in this PC, eg a HDD that's used for storage?  Disconnect that from the motherboard and then try booting from USB again. You will want to disconnect that other drive before trying to install the OS from the USB onto the new drive so the installer doesn't get "confused"..

    Try clearing BIOS after installing the new drive and disconnecting the HDD, if any:

    1. Power off, unplug
    2. Press/hold power button for ~15 sec
    3. Open case and remove motherboard battery (check Service Manual for details)
    4. Press/hold power button for ~30 sec
    5. Reinstall battery (Time for a fresh CR2032 3-volt coin cell battery?)
    6. Close up and connect only mouse, monitor, keyboard
    7. Connect bootable USB stick
    8. Power on and use F12 menu to boot from USB

     

  • 1735

    0

    Posted May 15th, 2020 16:00

    Thanks for the response. So, my original configuration was an SSD for the operating system and applications. Plus a SATA drive for storage. The SSD failed and I have since removed it. Now, I’m trying to install Win10 on the SATA drive that’s still in the system. 

    So, would you recommend since following the solution you outlined?

     

    Thanks!

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1725

    0

    Posted May 15th, 2020 16:00

    @easygoer72   - You still didn't tell us which PC model this is...

    Why not get another SSD to replace the one that failed?

    You do realize you're going to lose all your personal files stored on the HDD when you install the OS on it, right?

    Is that HDD connected to the blue SATA port (SATA 0) on the motherboard?

    I'd definitely clear BIOS before going any further...

     

  • Vic384

    6 Operator

    •

    3161 Posts

    1719

    0

    Posted May 15th, 2020 17:00

    @easygoer72 What you wrote needs some clarification. You stated that you have a "new drive in there" so I assume it was the replacement for the failed SSD and not an existing HDD with data on it. You also stated that you booted using F12 and "choose the UEFI USB boot option" so it seems to me that no matter what your drive configuration is the USB should have booted. If you have access to another computer, try booting the USB drive on that computer.

  • 1667

    0

    Posted May 17th, 2020 19:00

    Maybe you should download Windows 10 ISO image file from Microsoft website: https://www.microsoft.com/en-hk/software-download/windows10
    then use Windows Media creation tool to create a bootable drive, then reinstall your Windows 10 to the computer.

    Or you could reinstall Windows 10 without losing data for this guide.

    Hope it's helpful.

    Best regards.