Good evening, I have jsu taken delivery of a new XPS420 running Vista, The machine came with a 30 day trial of McAfee which I thought I had ordered 15months worth. I had a 3 licence copy of Kaspersky 7.0 Internet security from my last computer which died. I have uninstalled Mc Afee from Control panel and run the Mc Afee uninstall tool and there is no sign of it on my machine except "Security Centre" reports that I have 2 firewalls running. Kaspersky and Mc Afee with the subsequent warnings. Since I have no Mc Afee on my system I have no means to stop it running and Mc Afee technical help can't solve the issue either. Their advice is to contact the OS manufacturer which I assume is Dell as OEM. It may be just a bad report but I cannot share my printer with my wifes laptop even when I disable Kaspersky and windows firewall. Adding a printer to her laptop and browsing for it shows up nothing therefore I believe McAfee firewall is blocking it. Anyone have any ideas or even who to contact.
Good evening, Thanks for the prompt reply. I have already done that but did it again and still no luck. Security centre still reports multiple firewalls running and there is no way I can stop McAfee since the program is uninstalled. I cannot find McAfee in task manager so maybe its a false report however i cannot for the life of me get printer sharing to work. Any advice or checks much appreciated. McAfee can't fix it says its a windows problem!!
Your main problem appears to be the inability to share your printer. You have not said how the computers are networked. If they are connected by an Ethernet crossover cable or through a simple Ethernet switch you will have to manually assign suitable IP addresses to both computers. Let me know if you need more on this.
I have this computer hard connected to Netgear wireless router. My wifes laptop and my sons connect wirelessly to the internet through the router. It was working fine in XP until my motherboard gave up so I was forced into buying this Dell 420 which only ships with Vista. I have configured Kaspersky to share printers as far as I can make out and disabling all the firewalls I can ,ie Windows and Kaspersky the laptops cannot see any printers when I try to add a networked printer attached to another machine. It onlt sees Microsft Windows Network. Usually it would see the HP and Samsung attached to this machine which I then share. Hope this helps.
Thanks for the reply. I have rebooted the machine several times. McAfee took me through the Command prompt route to stop security centre etc and reboot after that. It is still showing as running.
Andy. Try the following if you have not already done so:
On your DELL 420 choose Start > Network >Network and Sharing Center.
Does Vista identify your existing network and show connection to the internet? Assuming it has, to the right of the network icon click the Customize link.
In the Set Network Location dialog box select the Private option and type in the same network name as used on the other networked computers.
When you click the Next button you will get confirmation of your network settings.
Your other computers should show up in the Network window.
Hopefully you will be able to see any shared printers.
Thank you for responding. I have tried to follow what you suggest and although there are at least 2 other computers on my Network and I have allowed for discovery of network and enabled printer sharing there is no evidence of this in the icons. It shows "This computer" __Network___Internet. If I click on "View full map" it says "windows cannot create the network map. Response from other devices is delayed or there is an incompatible router on the network. Router is Netgear DG834GT. I was thinking that it is a firewall issue as was the reason of the first post suggesting that I have 2 firewalls running so don't know what to try next.
Andy. Make sure your other computers running Windows XP both have had Windows XP Service Pack 2 installed.
Assuming SP2 has been installed, run the Network Setup Wizard. On the XP computers choose Start > All programs > Accessories > Communications > Network Setup Wizard.
When you have finished answering all the questions the network should be in operation. Try going to Start > Network etc on your Vista computer.
MoneyGuyBK
2 Intern
•
2294 Posts
640
0
Posted May 20th, 2008 20:00
download the removal tool, go to https://us.mcafee.com/root/MCPR2.exe
Peace