UNSOLVED

leiraska

updated

13 years ago

L

leiraska

35 Posts

0

702

October 18th, 2013 03:00

Tell me How to configure SAN Copy from Block to Unified, plz!

Hi again.

I'm planning to configure some SAN Copy iscsi sessions from Block to Unified VNX.

I won't use Mirror View.

Has anyone experienced such configuration?

And is there any special procedure, differying from Block-to-Block iscsi SAN copies?

Sincerely,

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    324

    0

    Posted October 18th, 2013 07:00

    should be no different, as long as source ports can talk to target port you are good to go.

  • leiraska

    35 Posts

    324

    0

    Posted October 20th, 2013 17:00

    thans to such a quick reply!

    may ask you one more question?

    Should I separate the iSCSI port for SAN Copy from that for Mirror View even if i'm not using MV.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    324

    0

    Posted October 20th, 2013 18:00

    from what i remember reading it was recommended to separate MirrorView and SanCopy traffic regardless if MirrorView was used or not.

  • Madhug1

    2 Intern

    •

    127 Posts

    324

    0

    Posted October 21st, 2013 10:00

    Hi,

    You may refer this document for more information.

    http://www.emc.com/collateral/hardware/white-papers/h8248-migrating-block-vnx-wp.pdf

    Thanks

    Madhusudan