One of our client is decommissioning four VNX 5200 but they want the data to be transferred since they are not in the network they are using serial connection but they are not able to login attached the image for your reference kindly give a solution for this.
I'd check 1. connection to the second SP, 2. connection setup and then 3. check port on the SP - I saw similar output when the customer connected to the port with battery picture
AleksandrKurak
1 Rookie
•
7 Posts
•
2 Points
0
0
Posted December 2nd, 2024 05:41
I'd check 1. connection to the second SP, 2. connection setup and then 3. check port on the SP - I saw similar output when the customer connected to the port with battery picture