RYANDR

updated

14 years ago

R

RYANDR

1 Rookie

•

3 Posts

0

1389

May 8th, 2013 10:00

how to configure fabric cable (PN:038-003-915) with dispersed layout

Does anyone know how to set the cable property in bin files?  I use a fabric cable (PN:038-003-915) NOT COPPER connect system bay 3 to MIBE. in Vmax 10K

  • AranH1

    2163 Posts

    648

    0

    Posted May 9th, 2013 05:00

    That part number you listed is the dispersed bay optical bundle for System Bays 3 and 4. The only setting in the BIN that I am aware of is the Dispersed System setting on the IMPL section. Apart from that setting there is not a cable type setting in the BIN.

    Sites with dispersed bays are provided with 2 - 20 meter fabric cable bundles that extend into system bays 2 and 3. Each bundle includes four optical cables and one spare. Individual cables within the bundle require a QSFP transceiver at each end. If system bay 4 is not present, the unused optical cables and the spare are coiled and dressed in the lower coast-to-coast bracket of system bays 2 and 3.

    VMAX 10K Dispersed Bay Routing.jpg

  • RYANDR

    1 Rookie

    •

    3 Posts

    648

    0

    Posted May 9th, 2013 19:00

    thanks for your support

  • jamesliu1

    44 Posts

    648

    0

    Posted May 13th, 2013 01:00

    To enable Dispersed Bay set the Dispersed System flag to YES in the IMPL Init under Common Settings.