UNSOLVED

stan_1936

updated

19 years ago

S

stan_1936

99 Posts

0

11462

June 15th, 2007 12:00

Install pre-loaded Norton and then uninstall or just uninstall?

A relative got his Inspiron pre-loaded with a 90 day free-trial of Norton Internet Security, which he wishes to remove.  Should he
 
1.  Install it and then uninstall AND THEN run Norton's uninstall utility?
 
OR
 
2.  Just uninstall it and run Norton's uninstall utility?
 
 
Also, this uninstall utility....is it a stand alone tool or would he need to first remove the software from the Control Panel BEFORE running the Norton uninstall utility?
 
I haven't used a Norton product in a while so your help would be greatly appreciated.
  • trailrated1

    86 Posts

    433

    0

    Posted June 15th, 2007 19:00

    I would shutdown Norton through the task bar then uninstall through the control panel add/remove. Then i would do a windows search for any remaining Norton/ Symantec files or folders and then reboot and run the removal tool in safe mode.It also would be a good idea to download any replacement software to a CD so you can just re-install afterwards without having to go on-line unprotected.
     
  • stan_1936

    99 Posts

    433

    0

    Posted June 17th, 2007 00:00

    1. So, you're saying don't install it and THEN uninstall. Would it give problems if trying to uninstall the pre-loaded product without actually going through the installation process? I mean, it shows up in the Control Panel but, if he has to go through the "Installation" procedure, that would sound to me like the product isn't actually installed..or is it installed or just not set up? This is the part that is confusing to me and I doubt he'd get a more informative answer over the phone. 2. Safe mode? Is there some reason for that? Why shouldn't it just be done in Normal Mode?

    Message Edited by stan_1936 on 06-16-2007 08:28 PM
  • zbestwun2001

    4 Apprentice

    •

    8831 Posts

    433

    0

    Posted June 17th, 2007 01:00

    The uninstall tool should do the trick alone.
    I would let it stay in the system, don't go the Control Panel first, and do it that way.

    Norton can be real tricky uninstalling it so be careful.

    zb1
  • Bugbatter

    4 Apprentice

    •

    20487 Posts

    433

    0

    Posted June 17th, 2007 13:00

    If NIS was pre-installed, but never used/updated, you may be able to get by with just using Add/Remove, but to be sure there are no remnants hanging around, especially because NIS involves more components than just anti-virus, running a follow-up with the removal tool would do a more thorough job.

    If you follow these steps, you will not have to go online unprotected.

    1. Download the removal tool from the link mentioned above.
    Save the file to the Windows desktop. Do not run it yet.

    2. Reboot into Safe mode.

    3. Uninstall NIS using Add/Remove Programs.

    4. Follow with running the removal tool that you have on your desktop.

    5. Reboot normally and install your new security software.

    To answer your question about Safemode: By removing in that mode, any files that might be running realtime anti-malware protection would not be running and will be easier to remove. Normal mode would probably be okay, but Safe mode is just a step to make sure the uninstall goes smoothly.

    Message Edited by Bugbatter on 06-17-2007 10:20 AM