CPrem

updated

13 years ago

C

CPrem

1 Rookie

•

32 Posts

0

1906

November 21st, 2013 07:00

SRDF of Target of clone session

I ahve clone session activated on two devices and I am trying to do SRDF from the cone sessions's target and I am getting error that an SRDF mirror can not be added to a device in a timefinder clone session.

  • seancummins

    2 Intern

    •

    226 Posts

    816

    0

    Posted November 21st, 2013 08:00

    Was the Clone pair in a Copied state when you attempted to execute the SRDF createpair? You'll have to wait until the Clone copy is completed before you create the SRDF relationship.

  • seancummins

    2 Intern

    •

    226 Posts

    816

    0

    Posted November 21st, 2013 08:00

    Here's the applicable section from the SRDF CLI Guide (this happens to be from Solutions Enabler 7.6) --

    Screen Shot 2013-11-21 at 11.32.17 AM.png

  • seancummins

    2 Intern

    •

    226 Posts

    816

    0

    Posted November 21st, 2013 08:00

    Can you post the exact createpair command you're running (including the contents of the device file), and the exact error message you're getting?

  • Allen Ward

    6 Operator

    •

    2124 Posts

    136

    0

    Posted November 21st, 2013 08:00

    Hmmm... good point dynamox. My source array was running 5773 code. Maybe this is 58xx specific?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    816

    0

    Posted November 21st, 2013 08:00

    clone target can be SRDF source without terminating clone relationship  ?

  • CPrem

    1 Rookie

    •

    32 Posts

    816

    0

    Posted November 21st, 2013 08:00

    the clone is in copied state

    C:\Users\N0157794>symclone
    query -g CLONE24_1235_PDC_VDE_TMPLT

    Device
    Group (DG) Name: CLONE24_1235_PDC_VDE_TMPLT

    DG's
    Type             : ANY

    DG's
    Symmetrix ID     : 000195701235

             Source Device                   Target Device            State     Copy

    ---------------------------------
    ---------------------------- ------------ ----

                   Protected Modified                Modified

    Logical   Sym
    Tracks    Tracks   Logical 
    Sym  Tracks   CGDP SRC <=> TGT  (%)

    ---------------------------------
    ---------------------------- ------------ ----

    DEV001    1515       
    0        0 TGT001    174D      
    0 XXX. Copied       100

    Total           -------- --------                --------

      Track(s)             0        0                       0

      MB(s)              0.0      0.0                     0.0

    Legend:

    (C): X
    = The background copy setting is active for this pair.

         V = The VP Snap setting is active for this
    pair.

         . = Neither setting is active for this
    pair.

    (G): X
    = The Target device is associated with this group.

         . = The Target device is not associated
    with this group.

    (D): X
    = The Clone session is a differential copy session.

         . = The Clone session is not a
    differential copy session.

    (P): X
    = The pre-copy operation has completed one cycle.

         . = The pre-copy operation has not
    completed one cycle.

    I am doing below steps:

    • Create RDF Group from 1235 to 1241

                    symrdf addgrp
    -label TPLT_35_41 -rdfg 51 -sid 1235 -dir 7H,8H,9H,10H -remote_rdfg 51
    -remote_sid 1241 -remote_dir 7H,8H,9H,10H

    • Add Device Groups to RDF Group

                    symdg -type RDF1
    create RDF_1235_1241_TMPLT

    • Add R1 devices to Device Group

    symdg -g RDF_1235_1241_TMPLT -sid 1235 add dev  174D

    • Create pairs

                                    use
    174D (1235) & 145C (1241)

    • Set RDF Group to Async (on source array)

                    symrdf -sid 1235
    -rdfg 51 set mode async

  • Allen Ward

    6 Operator

    •

    2124 Posts

    816

    0

    Posted November 21st, 2013 08:00

    Interesting. We tried to do this for migration of hosts to a new array and the documentation we were looking at said we couldn't do it. And that was after trying and failing. We had to sever the clone relationships to SRDF the clone.

  • seancummins

    2 Intern

    •

    226 Posts

    816

    0

    Posted November 21st, 2013 08:00

    Dynamox,

    Yes, a clone target can be an R1 without terminating the clone session... it's a standard SRDF/DM replication flow, but is not used very often anymore.

  • CPrem

    1 Rookie

    •

    32 Posts

    518

    0

    Posted November 21st, 2013 08:00

    I am able to create srdf session,  I just need to wait little bit afetr the clone status changed to copied status.

    I am using precopy for clone.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    816

    0

    Posted November 21st, 2013 08:00

    so you can create SRDF session but can't use -precopy ..am i reading that table correctly ? Was this always available in 76 ?