UNSOLVED

nikam1

updated

17 years ago

N

nikam1

51 Posts

0

975

January 5th, 2010 09:00

Can we install and use two versions of SE in one control host??

Hi All,

We currenly have SE 6.4.3 which we use manage local DMX and remove DMX. Now we are getting couple of VMAX controllers and we need to install SE 7.1 to manage it.

My question is.. Can we install two versions of SE in the same control host and manage DMX with 6.4.3 and VMAX with 7.1???

Thank you..

  • nikam1

    51 Posts

    615

    0

    Posted January 5th, 2010 09:00

    using 6.4 version, we have to manage old controllers till June. Mean while we have to manage new VMAX now. So curious if we can use both..

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    615

    0

    Posted January 5th, 2010 09:00

    SE 7.1 re-instated support for 5567 and 5568
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    615

    0

    Posted January 5th, 2010 09:00

    as far as i know ..no . Each version runs its own daemons so the minute you try to install 7.x it will replace 6.4.x ones. Is there a reason you can't go to 7.1 ? Do you have really old arrays still being managed by 6.4 ?
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    615

    0

    Posted January 5th, 2010 10:00

    i don't see any other options but to setup another host (could be virtual machine with RDM LUNs)
  • Quincy561

    1281 Posts

    615

    0

    Posted January 5th, 2010 10:00

    I would expect the 7.1 would manage your DMX systems just fine.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    615

    0

    Posted January 5th, 2010 11:00

    SE 7.x dropped support for 5670, i have a couple of DMX1K/2K that are still on 70 ..so those are being managed by SE 6.5.3