UNSOLVED

Holland007

updated

21 years ago

H

Holland007

14 Posts

0

8851

November 12th, 2005 10:00

windows says my C: is removable, but it isn't

when i tried to reinstall Windows XP on my Dell Dimension 8400, the pc says I can't format removable media. This happens when i type Format C: in the windows XP herstelconsole.
But my hard drive (c) isn't an removable hard drive. The hard drive I have is an 160 GB (7200rpm) SATA hard drive.
 
How can I make the 'removable' hard drive an not-removable hard drive?
 
 
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    724

    0

    Posted November 12th, 2005 11:00

    The media descriptor byte has been changed. Before you attempt a format/reinstall, run the Dell diagnostics on the drive.

    If it checks out, wipe the drive clean using the manufacturer's utility and then do the install.

    If the drive fails the check, replace it.
  • Holland007

    14 Posts

    724

    0

    Posted November 12th, 2005 12:00

    I did the Dell Diagnostics.

    When I do the test, i get this error:

    Error code 0F00:136C

    Msg: IDE device failed: Blank media or no media is present in optical drive.

     

    What should I do now? Couple of days ago i installed this floppy disk:

    *** The Intel(R) Application Accelerator is designed to provide
    functionality for the following Storage Controllers:

     - Intel(R) 82801FR SATA RAID Controller
     - Intel(R) 82801FR SATA AHCI Controller ***
     
    I don't know what the problem is.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    724

    0

    Posted November 12th, 2005 13:00

    When you boot the XP CD, you must press F6 when indicated, and insert (into an internal drive) the floppy diskette with the SATA drivers. Otherwise the system will not find a hard drive to install onto.

    That is the problem.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    724

    0

    Posted November 12th, 2005 13:00

    That error pertains to a CD/DVD drive that has no writeable media in it.
    Is the system detecting the hard drive?
  • Holland007

    14 Posts

    724

    0

    Posted November 12th, 2005 13:00

    in reality the hard disk is working, i'm working on this pc right now.
    But when I trie to install it says no hard disk found.
     
    and when i try to format the disk... it says the disk is removable and cause of it;s removable, it cant format...
  • 724

    0

    Posted November 12th, 2005 18:00

    Yes.  When the system is booting, it has to allocate drive letters to devices that it detects in order.  This is a common issue when trying to redo a drive in NTFS...it allocates drive C: to the CDROM drive because it can't see NTFS properly.

    This one is a SATA drive that has to be dealt with entirely different than a PATA drive.  Your system is simply not identifying the drive 0 ( C: ) as a drive.  So it allocates C: to the first drive it *can* understand/see which will be first PATA drive or optical drive.

    Message Edited by BigDaddyJinx on 11-12-2005 02:10 PM